Strain-Based Hydrogen Quantification in a Metal Hydride Vessel
Energies · 25.03.2026 · 19 (7) · 1617
DOI: 10.3390/en19071617 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energies, online erschienen am 25.03.2026. Verfasst von Pyoungjong Lee und 5 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Energy Technology Evaluation and Planning.
Abstract (Originalsprache)
Metal hydrides store hydrogen in the solid state with high density and inherent safety, and their thermodynamic characteristics are typically described by the pressure–composition–isotherm (PCI) curve. In the plateau pressure region of the PCI curve, the equilibrium pressure remains nearly constant over a wide hydrogen concentration range, making conventional pressure-based methods unsuitable for quantifying the hydrogen amount in metal hydride vessels. This study proposes a strain-based method to quantify the hydrogen amount in a metal hydride vessel by measuring the strain induced on the metal hydride vessel surface due to the volumetric change of the metal hydride during hydrogen adsorption and desorption. The installation of strain gauges on the metal hydride vessel was verified using argon pressurization tests. The metal hydride was activated prior to controlled hydrogen desorption experiments aimed at quantifying the amount of hydrogen remaining in the vessel. A correlation between strain and hydrogen amount was obtained from experiments conducted at discrete measurement points. The hydrogen amount estimated using the strain-based method was further evaluated through continuous time-series desorption tests and showed good agreement with the results obtained from the mass flow controller (MFC)-based method, with a maximum difference of 4.5%. These results demonstrate that the proposed method provides a simple and reliable approach for quantifying the hydrogen amount in metal hydride vessels.
Förderung
- Korea Institute of Energy Technology Evaluation and Planning
Zitieren
APA
Lee, P., Jung, K., Kang, K., Jeong, S., Lee, K. B., & Park, C. (2026). Strain-Based Hydrogen Quantification in a Metal Hydride Vessel. Energies, 19(7), 1617. https://doi.org/10.3390/en19071617
Vancouver
Lee P, Jung K, Kang K, Jeong S, Lee KB, Park C. Strain-Based Hydrogen Quantification in a Metal Hydride Vessel. Energies. 2026;19(7):1617. doi:10.3390/en19071617
BibTeX
@article{Lee2026,
author = {Lee, Pyoungjong and Jung, Kwangjin and Kang, Kyoungsoo and Jeong, Seonguk and Lee, Ki Bong and Park, Chusik},
title = {Strain-Based Hydrogen Quantification in a Metal Hydride Vessel},
journal = {Energies},
year = {2026},
volume = {19},
number = {7},
pages = {1617},
doi = {10.3390/en19071617}
}
EUVIMED