Carbon Emission Calculation During the Production and Construction Phases of Overhead Transmission Lines
Energies · 07.02.2026 · 19 (4) · 873
DOI: 10.3390/en19040873 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energies, online erschienen am 07.02.2026. Verfasst von Ting Zeng und 7 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Southern Power Grid.
Abstract (Originalsprache)
Overhead transmission lines are crucial components of power grid construction, and their carbon emissions significantly impact the low-carbon construction of the power grid. This study adopts a cradle-to-gate life cycle assessment (LCA) method, defining the system boundary as the material production, transportation, and construction phases. Using the carbon-accounting software eFootprint and the emission factor method, we calculate and analyze the carbon emissions of a 500 kV double-circuit overhead transmission line project in Shantou, Guangdong Province, and systematically examine the emission characteristics from material production through construction. Results show that the material production phase dominates the carbon emissions of the project, accounting for 99.82% of the total emissions. Among them, conductors (49.41%) and tower materials (37.28%) are the core sources of carbon emissions, with a combined contribution of 86.69%. The findings highlight conductors and towers as key targets for emission reduction through strategies such as optimized material selection, adoption of high-strength lightweight alternatives, and modular construction techniques. However, this analysis has limitations: it is confined to a single subtropical coastal project, relies on industry-average emission factors from the CLCD database (with inherent methodological uncertainties), excludes operational and end-of-life phases, and should not be generalized without regional validation. While the study identifies key emission hotspots and potential mitigation levers, quantitative low-carbon design guidance requires project-specific data and full life-cycle assessment.
Förderung
- China Southern Power Grid
Zitieren
APA
Zeng, T., Chen, Y., Wang, L., Yuan, M., Ma, B., Wu, H., Liu, J., & Lu, Y. (2026). Carbon Emission Calculation During the Production and Construction Phases of Overhead Transmission Lines. Energies, 19(4), 873. https://doi.org/10.3390/en19040873
Vancouver
Zeng T, Chen Y, Wang L, Yuan M, Ma B, Wu H, et al. Carbon Emission Calculation During the Production and Construction Phases of Overhead Transmission Lines. Energies. 2026;19(4):873. doi:10.3390/en19040873
BibTeX
@article{Zeng2026,
author = {Zeng, Ting and Chen, Yueqing and Wang, Liuhuo and Yuan, Mingpeng and Ma, Binbin and Wu, Huijun and Liu, Jia and Lu, Yuchen},
title = {Carbon Emission Calculation During the Production and Construction Phases of Overhead Transmission Lines},
journal = {Energies},
year = {2026},
volume = {19},
number = {4},
pages = {873},
doi = {10.3390/en19040873}
}
EUVIMED