Study on Electrochemical Performance and Magnesium Storage Mechanism of Na3V2(PO4)3@C Cathode in Mg(TFSI)2/DME Electrolyte
Energies · 14.11.2025 · 18 (22) · 5975
DOI: 10.3390/en18225975 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energies, online erschienen am 14.11.2025. Verfasst von Jinxing Wang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Chongqing Technology Innovation and Application Development Project, Chongqing University Large-scale Instrument and Equipment Open Fund.
Abstract (Originalsprache)
Magnesium metal boasts a high theoretical volumetric specific capacity and abundant reserves. Magnesium batteries offer high safety and environmental friendliness. In recent years, magnesium-ion batteries (MIBs) with Mg or Mg alloys as anodes have garnered extensive interest and emerged as promising candidates for next-generation competitive energy storage technologies. However, MIBs are plagued by issues such as sluggish desolvation kinetics and slow migration kinetics, which lead to limitations including a limited electrochemical window and poor magnesium storage reversibility. Herein, the sodium vanadium phosphate @ carbon (Na3V2(PO4)3@C, hereafter abbreviated as NVP@C) cathode material was synthesized via a sol–gel method. The electrochemical performance and magnesium storage mechanism of NVP@C in a 0.5 M magnesium bis(trifluoromethanesulfonyl)imide/ethylene glycol dimethyl ether (Mg(TFSI)2/DME) electrolyte were investigated. The as-prepared NVP@C features a pure-phase orthorhombic structure with a porous microspherical morphology. The discharge voltage of NVP@C is 0.75 V vs. activated carbon (AC), corresponding to 3.5 V vs. Mg/Mg2+. The magnesium storage process of NVP@C is tentatively proposed to follow a ‘sodium extraction → magnesium intercalation → magnesium deintercalation’ three-step intercalation–deintercalation mechanism, based on the characterization results of ICP-OES, ex situ XRD, and FTIR. No abnormal phases are generated throughout the process, and the lattice parameter variation is below 0.5%. Additionally, the vibration peaks of PO4 tetrahedrons and VO6 octahedrons shift reversibly, and the valence state transitions between V3+ and V4+/V5+ are reversible. These results confirm the excellent reversibility of the material’s structure and chemical environment. At a current density of 50 mA/g, NVP@C delivers a maximum discharge specific capacity of 62 mAh/g, with a capacity retention rate of 66% after 200 cycles. The observed performance degradation is attributed to the gradual densification of the CEI film during cycling, leading to increased Mg2+ diffusion resistance. This work offers valuable insights for the development of high-voltage MIB systems.
Förderung
- Chongqing Technology Innovation and Application Development Project
- Chongqing University Large-scale Instrument and Equipment Open Fund
Zitieren
APA
Wang, J., Zhang, P., Mou, X., Yang, J., Wang, J., Huang, G., & Wang, J. (2025). Study on Electrochemical Performance and Magnesium Storage Mechanism of Na3V2(PO4)3@C Cathode in Mg(TFSI)2/DME Electrolyte. Energies, 18(22), 5975. https://doi.org/10.3390/en18225975
Vancouver
Wang J, Zhang P, Mou X, Yang J, Wang J, Huang G, et al. Study on Electrochemical Performance and Magnesium Storage Mechanism of Na3V2(PO4)3@C Cathode in Mg(TFSI)2/DME Electrolyte. Energies. 2025;18(22):5975. doi:10.3390/en18225975
BibTeX
@article{Wang2025,
author = {Wang, Jinxing and Zhang, Peiyang and Mou, Xuan and Yang, Jingdong and Wang, Jiaxu and Huang, Guangsheng and Wang, Jingfeng},
title = {Study on Electrochemical Performance and Magnesium Storage Mechanism of Na3V2(PO4)3@C Cathode in Mg(TFSI)2/DME Electrolyte},
journal = {Energies},
year = {2025},
volume = {18},
number = {22},
pages = {5975},
doi = {10.3390/en18225975}
}
EUVIMED