EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Toward Reliable FOWT Modeling: A New Calibration Approach for Extreme Environmental Loads

Ho-Seong Yang, Ali Alkhabbaz, Young-Ho Lee

Energies · 21.10.2025 · 18 (20) · 5545

DOI: 10.3390/en18205545 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 21.10.2025. Verfasst von Ho-Seong Yang und 2 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Energy Technology Evaluation and Planning (KETEP) grant funded by the Korean government.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The current paper presents a comparative analysis between a high-fidelity simulation tool and computational fluid dynamics (CFD) in evaluating the behavior of a fully coupled floating offshore wind turbine (FOWT) system subjected to three distinct design load cases, with a particular emphasis on extreme weather scenarios. While both approaches yielded comparable results under standard operational conditions, noticeable discrepancies emerged in surge drift and mooring line tension during typhoon conditions. The present work highlighted a significant limitation of standard calibration methods based on free-deck motion that are not reflective of the unique features of extreme environmental responses. To address this limitation, a novel calibration methodology is suggested that uses drag coefficients derived from direct measurement of extreme load cases. The prediction accuracy of the high-fidelity simulation model was significantly improved by refining the transverse component of the drag coefficients of major structural components, decreasing prediction accuracy of surge and mooring tension responses from almost 30% error to about 5%. Further, despite increasing the fidelity of calibration under extreme environmental conditions, it is primarily contingent on high-fidelity measurements corresponding to the use of the most conventional calibration approach under normal environmental conditions. Ultimately, the results demonstrate the need for accurate calibration approaches to provide reliable performance predictions of FOWT systems under varying extreme environmental conditions.

Förderung

  • Korea Institute of Energy Technology Evaluation and Planning (KETEP) grant funded by the Korean government

Zitieren

APA

Yang, H., Alkhabbaz, A., & Lee, Y. (2025). Toward Reliable FOWT Modeling: A New Calibration Approach for Extreme Environmental Loads. Energies, 18(20), 5545. https://doi.org/10.3390/en18205545

Vancouver

Yang H, Alkhabbaz A, Lee Y. Toward Reliable FOWT Modeling: A New Calibration Approach for Extreme Environmental Loads. Energies. 2025;18(20):5545. doi:10.3390/en18205545

BibTeX
@article{Yang2025,
  author = {Yang, Ho-Seong and Alkhabbaz, Ali and Lee, Young-Ho},
  title = {Toward Reliable FOWT Modeling: A New Calibration Approach for Extreme Environmental Loads},
  journal = {Energies},
  year = {2025},
  volume = {18},
  number = {20},
  pages = {5545},
  doi = {10.3390/en18205545}
}
Kostenlos starten →