EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Directly Heated Solid Media Thermal Energy Storage System for Heat Supply in Battery Electric Vehicles: A Holistic Evaluation

Thorsten Ott, Volker Dreißigacker

Energies · 11.10.2025 · 18 (20) · 5354

DOI: 10.3390/en18205354 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 11.10.2025. Verfasst von Thorsten Ott und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Battery electric vehicles (BEVs) play a key role in reducing CO2 emissions and enabling a climate-neutral economy. However, they suffer from reduced range in cold conditions due to electric cabin heating. Electrically heated thermal energy storage (TES) systems can decouple heat generation from demand, thereby preventing a loss of range. For this purpose, a novel concept based on a directly electrically heated ceramic solid media TES is investigated, aiming to achieve high storage density while enabling both high charging and discharging powers. To assess the feasibility of the proposed TES concept in BEVs, a holistic evaluation of central aspects is conducted, including experimental characterization for material selection, experimental investigations on electrical contacting, and simulations of the electrothermal charging and thermal discharging processes under vehicle-relevant conditions. As a result of the material characterization, a promising material—a silicon carbide-based composite—was identified, which meets the electrothermal requirements under typical household charging conditions and allows reliable operation with silver-metallized electrodes. Design studies with this material show gravimetric energy densities—including thermal insulation demand—exceeding 100 Wh/kg, storage utilization of up to 90%, and fast charging within 25 min, while offering 5 kW at flexible temperature levels for cabin heating during thermal discharging. These results show that the basic prerequisites for such storage systems are met, while further development—particularly in terms of material improvements—remains necessary.

Zitieren

APA

Ott, T., & Dreißigacker, V. (2025). Directly Heated Solid Media Thermal Energy Storage System for Heat Supply in Battery Electric Vehicles: A Holistic Evaluation. Energies, 18(20), 5354. https://doi.org/10.3390/en18205354

Vancouver

Ott T, Dreißigacker V. Directly Heated Solid Media Thermal Energy Storage System for Heat Supply in Battery Electric Vehicles: A Holistic Evaluation. Energies. 2025;18(20):5354. doi:10.3390/en18205354

BibTeX
@article{Ott2025,
  author = {Ott, Thorsten and Dreißigacker, Volker},
  title = {Directly Heated Solid Media Thermal Energy Storage System for Heat Supply in Battery Electric Vehicles: A Holistic Evaluation},
  journal = {Energies},
  year = {2025},
  volume = {18},
  number = {20},
  pages = {5354},
  doi = {10.3390/en18205354}
}
Kostenlos starten →