Modelling Syngas Combustion from Biomass Gasification and Engine Applications: A Comprehensive Review
Energies · 25.09.2025 · 18 (19) · 5112
DOI: 10.3390/en18195112 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energies, online erschienen am 25.09.2025. Verfasst von José Ramón Copa Rey und 5 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 122 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e Tecnologia.
Abstract (Originalsprache)
Syngas, a renewable fuel primarily composed of hydrogen and carbon monoxide, is emerging as a viable alternative to conventional fossil fuels in internal combustion engines (ICEs). Obtained mainly through the gasification of biomass and organic waste, syngas offers significant environmental benefits but also presents challenges due to its lower heating value and variable composition. This review establishes recent advances in understanding syngas combustion, chemical kinetics, and practical applications in spark-ignition (SI) and compression-ignition (CI) engines. Variability in syngas composition, dependent on feedstock and gasification conditions, strongly influences ignition behavior, flame stability, and emissions, demanding detailed kinetic models and adaptive engine control strategies. In SI engines, syngas can replace up to 100% of conventional fuel, typically at 20–30% reduced power output. CI engines generally require a pilot fuel representing 10–20% of total energy to start combustion, favoring dual-fuel (DF) operation for efficiency and emissions control. This work underlines the need to integrate advanced modelling approaches with experimental insights to optimize performance and meet emission targets. By addressing challenges of fuel variability and engine adaptation, syngas reveals promising potential as a clean fuel for future sustainable power generation and transport applications.
Förderung
- Fundação para a Ciência e Tecnologia
Zitieren
APA
Rey, J. R. C., Longo, A., Rijo, B., Mateos-Pedrero, C., Brito, P., & Nobre, C. (2025). Modelling Syngas Combustion from Biomass Gasification and Engine Applications: A Comprehensive Review. Energies, 18(19), 5112. https://doi.org/10.3390/en18195112
Vancouver
Rey JRC, Longo A, Rijo B, Mateos-Pedrero C, Brito P, Nobre C. Modelling Syngas Combustion from Biomass Gasification and Engine Applications: A Comprehensive Review. Energies. 2025;18(19):5112. doi:10.3390/en18195112
BibTeX
@article{Rey2025,
author = {Rey, José Ramón Copa and Longo, Andrei and Rijo, Bruna and Mateos-Pedrero, Cecilia and Brito, Paulo and Nobre, Catarina},
title = {Modelling Syngas Combustion from Biomass Gasification and Engine Applications: A Comprehensive Review},
journal = {Energies},
year = {2025},
volume = {18},
number = {19},
pages = {5112},
doi = {10.3390/en18195112}
}
EUVIMED