EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Comparison of Water-Based Cooling Methods for PV Modules in Tropical Conditions

Nam Quyen Nguyen, Hristo Ivanov Beloev, Huy Bich Nguyen, Van Lanh Nguyen

Energies · 23.09.2025 · 18 (19) · 5054

DOI: 10.3390/en18195054 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 23.09.2025. Verfasst von Nam Quyen Nguyen und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union—NextGenerationEU—through the National Recovery and Resilience Plan of the Republic of Bulgaria.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

It is well known that temperature strongly affects the photovoltaic (PV) performance. Raising the working temperature leads to a significant decrease in PV output of the power capacity, and it also lowers power conversion efficiency. This issue is highly important for the PV systems operating in tropical climate areas such as southern Viet Nam. Developing the cooling methods applied for reducing the PV module temperature might be the solution to this problem and has attracted many researchers and industrial sectors. However, the existing research might not sufficiently address the comparative evaluation of multiple active water-based cooling methods on power conservation efficiency, power output, and cost implications under high-temperature conditions in tropical areas. This study is a case study that aims at conducting some experimental investigations for active water-based cooling methods applied to PV modules in Ho Chi Minh City, South Viet Nam. There are four active water-based cooling methods, including the spraying liquid method (SL), the dripping droplet method (DD), tube heat exchanger method (TE), and the liquid flowing on the PV surface method (LF), that have been developed and experimentally investigated. The voltage, current, temperature, and humidity of the PV cells have been automatically recorded in every one-minute interval via sensors and electronic devices. The experimental results indicate that the surface temperature, the power conversion efficiency, and the output power of PV module are developed toward the useful and positive direction with four cooling methods. In detail, the SL is the best one, in which it leads the PV temperature to reduce from 52 °C to 34–35 °C, the output power increases up to 6.3%, its power conversion efficiency improves up to 2%, while the water flow rate is at its lowest with 0.65 L/min. Similarly, LF also creates results that are similar to SL, but it needs a higher amount of cooling water, which is up to 3.27 L/min. The other methods, like DD and TE, have less power conversion efficiency compared to the SL; it improves only around 1 to 1.3%. These results might be useful for improving the benefits of PV power generation in some tropical regions and contributing to the green energy development in the world.

Förderung

  • European Union—NextGenerationEU—through the National Recovery and Resilience Plan of the Republic of Bulgaria

Zitieren

APA

Nguyen, N. Q., Beloev, H. I., Nguyen, H. B., & Nguyen, V. L. (2025). Experimental Comparison of Water-Based Cooling Methods for PV Modules in Tropical Conditions. Energies, 18(19), 5054. https://doi.org/10.3390/en18195054

Vancouver

Nguyen NQ, Beloev HI, Nguyen HB, Nguyen VL. Experimental Comparison of Water-Based Cooling Methods for PV Modules in Tropical Conditions. Energies. 2025;18(19):5054. doi:10.3390/en18195054

BibTeX
@article{Nguyen2025,
  author = {Nguyen, Nam Quyen and Beloev, Hristo Ivanov and Nguyen, Huy Bich and Nguyen, Van Lanh},
  title = {Experimental Comparison of Water-Based Cooling Methods for PV Modules in Tropical Conditions},
  journal = {Energies},
  year = {2025},
  volume = {18},
  number = {19},
  pages = {5054},
  doi = {10.3390/en18195054}
}
Kostenlos starten →