EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study of the Thermal Performance of Oil-Cooled Electric Motor with Different Oil-Jet Ring Configurations

Hao Yang, Fan Wu, Jinhao Fu, Junxiong Zeng, Xiaojin Fu, Guangtao Zhai, Feng Zhang

Energies · 13.08.2025 · 18 (16) · 4302

DOI: 10.3390/en18164302 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 13.08.2025. Verfasst von Hao Yang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Research Program of Chong-qing Municipal Education Commission, Chongqing Provincial Natural Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the thermal performance of an oil-jet-cooled permanent magnet synchronous motor (PMSM), with a particular focus on end-winding heat dissipation. A high-fidelity numerical model that preserves the full geometric complexity of the end-winding is developed and validated against experimental temperature data, achieving average deviations below 7%. To facilitate efficient parametric analysis, a simplified equivalent model is constructed by replacing the complex geometry with a thermally equivalent annular region characterized by calibrated radial conductivity. Based on this model, the effects of key spray ring parameters—including orifice diameter, number of nozzles, inlet oil temperature, and flow rate—are systematically evaluated. The results indicate that reducing the orifice diameter from 4 mm to 2 mm lowers the maximum winding temperature from 162 °C to 153 °C but increases the pressure drop from 205 Pa to 913 Pa. An optimal nozzle number of 12 decreases the peak winding temperature to 155 °C compared with 162 °C for 8 nozzles, while increasing the oil flow rate from 2 L/min to 6 L/min reduces the peak winding temperature from 162 °C to 142 °C. Furthermore, a non-uniform spray ring configuration decreases maximum stator, winding, spray ring, and shaft temperatures by 5.6–9.2% relative to the baseline, albeit with a pressure drop increase from 907 Pa to 1410 Pa. These findings provide quantitative guidance for optimizing oil-jet cooling designs for PMSMs under engineering constraints.

Förderung

  • Science and Technology Research Program of Chong-qing Municipal Education Commission
  • Chongqing Provincial Natural Science Foundation

Zitieren

APA

Yang, H., Wu, F., Fu, J., Zeng, J., Fu, X., Zhai, G., & Zhang, F. (2025). Study of the Thermal Performance of Oil-Cooled Electric Motor with Different Oil-Jet Ring Configurations. Energies, 18(16), 4302. https://doi.org/10.3390/en18164302

Vancouver

Yang H, Wu F, Fu J, Zeng J, Fu X, Zhai G, et al. Study of the Thermal Performance of Oil-Cooled Electric Motor with Different Oil-Jet Ring Configurations. Energies. 2025;18(16):4302. doi:10.3390/en18164302

BibTeX
@article{Yang2025,
  author = {Yang, Hao and Wu, Fan and Fu, Jinhao and Zeng, Junxiong and Fu, Xiaojin and Zhai, Guangtao and Zhang, Feng},
  title = {Study of the Thermal Performance of Oil-Cooled Electric Motor with Different Oil-Jet Ring Configurations},
  journal = {Energies},
  year = {2025},
  volume = {18},
  number = {16},
  pages = {4302},
  doi = {10.3390/en18164302}
}
Kostenlos starten →