EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Energy-Saving Control of Automotive PEMFC Thermal Management System Based on Optimal Operating Temperature Tracking

Qi Jiang, Shusheng Xiong, Baoquan Sun, Ping Chen, Huipeng Chen, Shaopeng Zhu

Energies · 01.08.2025 · 18 (15) · 4100

DOI: 10.3390/en18154100 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 01.08.2025. Verfasst von Qi Jiang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program: Fuel cell passenger vehicle with low-temperature resistance and high safety.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To further enhance the economic performance of fuel cell vehicles (FCVs), this study develops a model-adaptive model predictive control (MPC) strategy. This strategy leverages the dynamic relationship between proton exchange membrane fuel cell (PEMFC) output characteristics and temperature to track its optimal operating temperature (OOT), addressing challenges of temperature control accuracy and high energy consumption in the PEMFC thermal management system (TMS). First, PEMFC and TMS models were developed and experimentally validated. Subsequently, the PEMFC power–temperature coupling curve was experimentally determined under multiple operating conditions to serve as the reference trajectory for TMS multi-objective optimization. For MPC controller design, the TMS model was linearized and discretized, yielding a predictive model adaptable to different load demands for stack temperature across the full operating range. A multi-constrained quadratic cost function was formulated, aiming to minimize the deviation of the PEMFC operating temperature from the OOT while accounting for TMS parasitic power consumption. Finally, simulations under Worldwide Harmonized Light Vehicles Test Cycle (WLTC) conditions evaluated the OOT tracking performance of both PID and MPC control strategies, as well as their impact on stack efficiency and TMS energy consumption at different ambient temperatures. The results indicate that, compared to PID control, MPC reduces temperature tracking error by 33%, decreases fan and pump speed fluctuations by over 24%, and lowers TMS energy consumption by 10%. These improvements enhance PEMFC operational stability and improve FCV energy efficiency.

Förderung

  • National Key Research and Development Program: Fuel cell passenger vehicle with low-temperature resistance and high safety

Zitieren

APA

Jiang, Q., Xiong, S., Sun, B., Chen, P., Chen, H., & Zhu, S. (2025). Research on Energy-Saving Control of Automotive PEMFC Thermal Management System Based on Optimal Operating Temperature Tracking. Energies, 18(15), 4100. https://doi.org/10.3390/en18154100

Vancouver

Jiang Q, Xiong S, Sun B, Chen P, Chen H, Zhu S. Research on Energy-Saving Control of Automotive PEMFC Thermal Management System Based on Optimal Operating Temperature Tracking. Energies. 2025;18(15):4100. doi:10.3390/en18154100

BibTeX
@article{Jiang2025,
  author = {Jiang, Qi and Xiong, Shusheng and Sun, Baoquan and Chen, Ping and Chen, Huipeng and Zhu, Shaopeng},
  title = {Research on Energy-Saving Control of Automotive PEMFC Thermal Management System Based on Optimal Operating Temperature Tracking},
  journal = {Energies},
  year = {2025},
  volume = {18},
  number = {15},
  pages = {4100},
  doi = {10.3390/en18154100}
}
Kostenlos starten →