EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Investigation on Flow and Thermal Characteristics of Spray Evaporation Process in Boiler Desuperheater

Jianqing Wang, Baoqing Liu, Bin Du, Kaifei Wu, Qi Lin, Bohai Liu, Minghui Cheng

Energies · 15.07.2025 · 18 (14) · 3734

DOI: 10.3390/en18143734 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 15.07.2025. Verfasst von Jianqing Wang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Postdoctoral Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The spray evaporation process in the boiler desuperheater involves complex droplet behaviors and fluid–thermal coupling, and its temperature distribution characteristics greatly affect the performance and safety of industrial processes. To better understand the process characteristics and develop the optimal desuperheater design, computational fluid dynamics (CFDs) was applied to numerically investigate the flow and thermal characteristics. The Eulerian–Lagrangian approach was used to describe the two-phase flow characteristics. Both primary and secondary droplet breakup, the coupling effect of gas–liquid and stochastic collision and coalescence of droplets were considered in the model. The plain-orifice atomizer model was applied to simulate the atomization process. The numerical model was validated with the plant data. The spray tube structure was found to greatly affect the flow pattern, resulting in the uneven velocity distribution, significant temperature difference, and local reverse flow downstream of the orifices. The velocity and temperature distributions tend to be more uniform due to the complete evaporation and turbulent mixing. Smaller orifices are beneficial for generating smaller-sized droplets, thereby promoting the mass and heat transfer between the steam and droplets. Under the same operating conditions, the desuperheating range of cases with 21, 15, and 9 orifices is 33.7 K, 32.0 K, and 29.8 K, respectively, indicating that the desuperheater with more orifices (i.e., with smaller orifices) shows better desuperheating ability. Additionally, a venturi-type desuperheater was numerically studied and compared with the straight liner case. By contrast, discernible differences in velocity and temperature distribution characteristics can be observed in the venturi case. The desuperheating range of the venturi and straight liner cases is 38.1 K and 35.4 K, respectively. The velocity acceleration through the venturi throat facilitates the droplet breakup and improves mixing, thereby achieving better desuperheating ability and temperature uniformity. Based on the investigation of the spray evaporation process, the complex droplet behaviors and fluid–thermal coupling characteristics in an industrial boiler desuperheater under high temperature and high pressure can be better understood, and effective guidance for the process and design optimizations can be provided.

Förderung

  • China Postdoctoral Science Foundation

Zitieren

APA

Wang, J., Liu, B., Du, B., Wu, K., Lin, Q., Liu, B., & Cheng, M. (2025). Numerical Investigation on Flow and Thermal Characteristics of Spray Evaporation Process in Boiler Desuperheater. Energies, 18(14), 3734. https://doi.org/10.3390/en18143734

Vancouver

Wang J, Liu B, Du B, Wu K, Lin Q, Liu B, et al. Numerical Investigation on Flow and Thermal Characteristics of Spray Evaporation Process in Boiler Desuperheater. Energies. 2025;18(14):3734. doi:10.3390/en18143734

BibTeX
@article{Wang2025,
  author = {Wang, Jianqing and Liu, Baoqing and Du, Bin and Wu, Kaifei and Lin, Qi and Liu, Bohai and Cheng, Minghui},
  title = {Numerical Investigation on Flow and Thermal Characteristics of Spray Evaporation Process in Boiler Desuperheater},
  journal = {Energies},
  year = {2025},
  volume = {18},
  number = {14},
  pages = {3734},
  doi = {10.3390/en18143734}
}
Kostenlos starten →