EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Application of a Phase-Change Material Heat Exchanger to Improve the Efficiency of Heat Pumps at Partial Loads

Koharu Tani, Sayaka Kindaichi, Keita Kawasaki, Daisaku Nishina

Energies · 12.07.2025 · 18 (14) · 3694

DOI: 10.3390/en18143694 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 12.07.2025. Verfasst von Koharu Tani und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: JSPS KAKENHI.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Inverter-equipped heat pumps allow for increased energy efficiency. However, air conditioning (AC) systems often operate at low load ratios below where inverter control is effective, which reduces their energy efficiency. We developed an AC system that increases the apparent load ratio of the heat pump by using a phase-change material (PCM). Cooling and heating experiments were conducted with a PCM heat exchanger, which comprised aluminum plates and fins filled with paraffinic PCM. The result indicated a high heat transfer coefficient of >70 W/(m2·K). A simplified numerical model of the PCM heat exchanger as a lumped constant system was created based on the experiment. The calculations generally reproduced the experimental results, with root mean squared errors of 0.39 K for cooling and 0.84 K for heating, confirming their accuracy. Simulations were then conducted to evaluate the energy performance of the proposed system for the cooling season. While low load operation accounted for 39% of the total AC time for a non-PCM system, it was reduced to 2.7% for the proposed system. The proposed system demonstrated load ratios of 50–60% for most of the season, achieving an energy reduction of 11.4% owing to the improved efficiency at partial load ratios.

Förderung

  • JSPS KAKENHI

Zitieren

APA

Tani, K., Kindaichi, S., Kawasaki, K., & Nishina, D. (2025). Application of a Phase-Change Material Heat Exchanger to Improve the Efficiency of Heat Pumps at Partial Loads. Energies, 18(14), 3694. https://doi.org/10.3390/en18143694

Vancouver

Tani K, Kindaichi S, Kawasaki K, Nishina D. Application of a Phase-Change Material Heat Exchanger to Improve the Efficiency of Heat Pumps at Partial Loads. Energies. 2025;18(14):3694. doi:10.3390/en18143694

BibTeX
@article{Tani2025,
  author = {Tani, Koharu and Kindaichi, Sayaka and Kawasaki, Keita and Nishina, Daisaku},
  title = {Application of a Phase-Change Material Heat Exchanger to Improve the Efficiency of Heat Pumps at Partial Loads},
  journal = {Energies},
  year = {2025},
  volume = {18},
  number = {14},
  pages = {3694},
  doi = {10.3390/en18143694}
}
Kostenlos starten →