EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Designing a Waste Heat Recovery Heat Exchanger for Polymer Electrolyte Membrane Fuel Cell Operation in Medium-Altitude Unmanned Aerial Vehicles

Juwon Jang, Jaehyung Choi, Seung-Jun Choi, Seung-Gon Kim

Energies · 22.06.2025 · 18 (13) · 3262

DOI: 10.3390/en18133262 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 22.06.2025. Verfasst von Juwon Jang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: “Development of Safety Verification Technology for Small Aircraft with Hydrogen Fuel Cell-Based Propulsion System” Program, Gyeonggi-do Regional Research Center (GRRC) program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer electrolyte membrane fuel cells (PEMFCs) are emerging as the next-generation powertrain for unmanned aerial vehicles (UAVs) due to their high energy density and long operating duration. PEMFCs are subject to icing and performance degradation problems at sub-zero temperatures, especially at high altitudes. Therefore, an effective preheating system is required to ensure stable PEMFC operation in high-altitude environments. This study aimed to mathematically model a shell-and-tube heat exchanger that utilizes waste heat recovery to prevent internal and external PEMFC damage in cold, high-altitude conditions. The waste heat from the PEMFC is estimated based on the thrust of the MQ-9 Reaper, and the proposed heat exchanger must be capable of heating air to −5 °C. As the heat exchanger utilizes only waste heat, the primary energy consumption arises from the coolant pumping process. Calculation results indicated that the proposed heat exchanger design improved the overall system efficiency by up to 15.7%, demonstrating its effectiveness in utilizing waste heat under aviation conditions.

Förderung

  • “Development of Safety Verification Technology for Small Aircraft with Hydrogen Fuel Cell-Based Propulsion System” Program
  • Gyeonggi-do Regional Research Center (GRRC) program

Zitieren

APA

Jang, J., Choi, J., Choi, S., & Kim, S. (2025). Designing a Waste Heat Recovery Heat Exchanger for Polymer Electrolyte Membrane Fuel Cell Operation in Medium-Altitude Unmanned Aerial Vehicles. Energies, 18(13), 3262. https://doi.org/10.3390/en18133262

Vancouver

Jang J, Choi J, Choi S, Kim S. Designing a Waste Heat Recovery Heat Exchanger for Polymer Electrolyte Membrane Fuel Cell Operation in Medium-Altitude Unmanned Aerial Vehicles. Energies. 2025;18(13):3262. doi:10.3390/en18133262

BibTeX
@article{Jang2025,
  author = {Jang, Juwon and Choi, Jaehyung and Choi, Seung-Jun and Kim, Seung-Gon},
  title = {Designing a Waste Heat Recovery Heat Exchanger for Polymer Electrolyte Membrane Fuel Cell Operation in Medium-Altitude Unmanned Aerial Vehicles},
  journal = {Energies},
  year = {2025},
  volume = {18},
  number = {13},
  pages = {3262},
  doi = {10.3390/en18133262}
}
Kostenlos starten →