EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on Swirling Flow and Spray Characteristics of Central Stage Direct Injection Combustor

Wenjie Jiang, Ziyu Qi, Jinhu Yang, Deqing Mei, Kaixing Wang, Yushuai Liu, Shaolin Wang, Fuqiang Liu, Yong Mu, Cunxi Liu, Gang Xu

Energies · 03.06.2025 · 18 (11) · 2926

DOI: 10.3390/en18112926 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 03.06.2025. Verfasst von Wenjie Jiang und 10 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Major Project, Strategic Priority Research Program of the Chinese Academy of Sciences.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To investigate the physical phenomena interactions between airstream and liquid injection or droplets within a complex multi-stage swirl flow field, this study investigated the flow field and spray characteristics in a central stage direct injection combustor with a variety of optical diagnostic techniques, including using time-resolved particle image velocimetry (PIV) to measure the swirl flow field, using time-resolved planar Mie scattering (PMie) to measure the spray pattern, and using a laser particle size analyzer (LPSA) to measure the spray droplet size and its distribution. The results indicate that the lip recirculation zone (LRZ) and the swirl jet zone (SJZ) significantly influence droplet spatial and size distribution characteristics, such as spray penetration, cone angle, and droplet size. Due to the unique characteristics of the dual-stage swirl atomizer, the spray cone angle and penetration do not increase monotonically with the gas Weber number (Weg). For the pilot stage, at a constant Weg, both the spray cone angle and penetration increase with higher fuel injection velocity. At different fuel injection velocities, the spray penetration increases with rising Weg. When the fuel injection velocity is low, the cone angle initially increases and then decreases as Weg grows. The results about the effect of Weg on droplet size distribution further support this conclusion. The Sauter mean diameter (SMD) of the main and pilot stage decreases with increasing relative pressure drop of air until reaching a stable state. The aerodynamic shear of the swirling airstream is sufficient to promote thorough fuel atomization, ensuring that the SMD remains low at the whole operating condition. Therefore, for the dual-stage swirl atomizer investigated in this study, good atomization can be achieved under low operating conditions, which provides a theoretical foundation and data support for the improvement and design of a low-emission, high-performance atomizer.

Förderung

  • National Science and Technology Major Project
  • Strategic Priority Research Program of the Chinese Academy of Sciences

Zitieren

APA

Jiang, W., Qi, Z., Yang, J., Mei, D., Wang, K., Liu, Y., Wang, S., Liu, F., Mu, Y., Liu, C., & Xu, G. (2025). Study on Swirling Flow and Spray Characteristics of Central Stage Direct Injection Combustor. Energies, 18(11), 2926. https://doi.org/10.3390/en18112926

Vancouver

Jiang W, Qi Z, Yang J, Mei D, Wang K, Liu Y, et al. Study on Swirling Flow and Spray Characteristics of Central Stage Direct Injection Combustor. Energies. 2025;18(11):2926. doi:10.3390/en18112926

BibTeX
@article{Jiang2025,
  author = {Jiang, Wenjie and Qi, Ziyu and Yang, Jinhu and Mei, Deqing and Wang, Kaixing and Liu, Yushuai and Wang, Shaolin and Liu, Fuqiang and Mu, Yong and Liu, Cunxi and Xu, Gang},
  title = {Study on Swirling Flow and Spray Characteristics of Central Stage Direct Injection Combustor},
  journal = {Energies},
  year = {2025},
  volume = {18},
  number = {11},
  pages = {2926},
  doi = {10.3390/en18112926}
}
Kostenlos starten →