EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Characterization of Zno:Al Nanolayers Produced by ALD for Clean Energy Applications

Marek Szindler, Magdalena Szindler, Krzysztof Matus, Błażej Tomiczek, Barbara Hajduk

Energies · 30.05.2025 · 18 (11) · 2860

DOI: 10.3390/en18112860 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 30.05.2025. Verfasst von Marek Szindler und 4 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The rising demand for sustainable energy solutions has spurred the development of advanced materials for photovoltaic devices. Among these, transparent conductive oxides (TCOs) play a pivotal role in enhancing device efficiency, particularly in silicon-based solar cells. However, the reliance on indium-based TCOs like ITO raises concerns over cost and material scarcity, prompting the search for more abundant and scalable alternatives. This study focuses on the fabrication and characterization of aluminum-doped zinc oxide (ZnO:Al, AZO) thin films deposited via Atomic Layer Deposition (ALD), targeting their application as transparent conductive oxides in silicon solar cells. The ZnO:Al thin films were synthesized by alternating supercycles of ZnO and Al2O3 depositions at 225 °C, allowing precise control of composition and thickness. Structural, optical, and electrical properties were assessed using Scanning Electron Microscopy (SEM), Energy-Dispersive X-ray Spectroscopy (EDS), Transmission Electron Microscopy (TEM), Raman spectroscopy, spectroscopic ellipsometry, and four-point probe measurements. The results confirmed the formation of uniform, crack-free ZnO:Al thin films with a spinel-type ZnAl2O4 crystalline structure. Optical analyses revealed high transparency (more than 80%) and tunable refractive indices (1.64 ÷ 1.74); the energy band gap was 2.6 ÷ 3.07 eV, while electrical measurements demonstrated low sheet resistance values, reaching 85 Ω/□ for thicker films. This combination of optical and electrical properties underscores the potential of ALD-grown AZO thin films to meet the stringent demands of next-generation photovoltaics. Integration of Zn:Al thin films into silicon solar cells led to an optimized photovoltaic performance, with the best cell achieving a short-circuit current density of 36.0 mA/cm2 and a power conversion efficiency of 15.3%. Overall, this work highlights the technological relevance of ZnO:Al thin films as a sustainable and cost-effective alternative to conventional TCOs, offering pathways toward more accessible and efficient solar energy solutions.

Zitieren

APA

Szindler, M., Szindler, M., Matus, K., Tomiczek, B., & Hajduk, B. (2025). Characterization of Zno:Al Nanolayers Produced by ALD for Clean Energy Applications. Energies, 18(11), 2860. https://doi.org/10.3390/en18112860

Vancouver

Szindler M, Szindler M, Matus K, Tomiczek B, Hajduk B. Characterization of Zno:Al Nanolayers Produced by ALD for Clean Energy Applications. Energies. 2025;18(11):2860. doi:10.3390/en18112860

BibTeX
@article{Szindler2025,
  author = {Szindler, Marek and Szindler, Magdalena and Matus, Krzysztof and Tomiczek, Błażej and Hajduk, Barbara},
  title = {Characterization of Zno:Al Nanolayers Produced by ALD for Clean Energy Applications},
  journal = {Energies},
  year = {2025},
  volume = {18},
  number = {11},
  pages = {2860},
  doi = {10.3390/en18112860}
}
Kostenlos starten →