EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Decarbonization of Blast Furnace Gases Using a Packed Bed of Ca-Cu Solids in a New TRL7 Pilot

Jose Ramon Fernandez, Monica Alonso, Alberto Mendez, Miriam Diaz, Roberto Garcia, Marcos Cano, Irene Alzueta, Juan Carlos Abanades

Energies · 31.01.2025 · 18 (3) · 675

DOI: 10.3390/en18030675 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 31.01.2025. Verfasst von Jose Ramon Fernandez und 7 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European H2020 Programme, CSIC’s Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+), Spanish Recovery, Transformation and Resilience Plan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work outlines the commissioning and initial experiments from a new pilot plant at Arcelor Mittal Gas Lab (Asturias, Spain) designed to decarbonize up to 300 Nm3/h of blast furnace gas (BFG). This investigation intends to demonstrate for the first time at TRL7 the calcium-assisted steel-mill off-gas hydrogen (CASOH) process to decarbonize blast furnace gases. The CASOH process is carried out in packed-bed reactors operating through three main reaction stages: (1) H2 production via the water–gas shift (WGS) of the CO present in the BFG assisted by the simultaneous carbonation of CaO; (2) oxidation of the Cu-based catalyst with air, and (3) reduction of CuO with a fuel gas to regenerate CaO and produce a concentrated CO2 stream. The first experimental campaign used 200 kg of commercial Ca- and Cu-based solids mixed to create a 1 m reactive bed, which is sufficient to validate operations and confirm the process’s effectiveness. A product gas with 40% of H2 is obtained with CO2 capture efficiency above 95%. Demonstrating at TRL7 the ability to convert BFG into H2-enriched gas with minimal CO/CO2 enables remarkable decarbonization in steel production while utilizing existing blast furnaces, eliminating the need for less commercially developed production processes.

Förderung

  • European H2020 Programme
  • CSIC’s Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+)
  • Spanish Recovery, Transformation and Resilience Plan
  • Recovery and Resilience Facility of the European Union

Zitieren

APA

Fernandez, J. R., Alonso, M., Mendez, A., Diaz, M., Garcia, R., Cano, M., Alzueta, I., & Abanades, J. C. (2025). Decarbonization of Blast Furnace Gases Using a Packed Bed of Ca-Cu Solids in a New TRL7 Pilot. Energies, 18(3), 675. https://doi.org/10.3390/en18030675

Vancouver

Fernandez JR, Alonso M, Mendez A, Diaz M, Garcia R, Cano M, et al. Decarbonization of Blast Furnace Gases Using a Packed Bed of Ca-Cu Solids in a New TRL7 Pilot. Energies. 2025;18(3):675. doi:10.3390/en18030675

BibTeX
@article{Fernandez2025,
  author = {Fernandez, Jose Ramon and Alonso, Monica and Mendez, Alberto and Diaz, Miriam and Garcia, Roberto and Cano, Marcos and Alzueta, Irene and Abanades, Juan Carlos},
  title = {Decarbonization of Blast Furnace Gases Using a Packed Bed of Ca-Cu Solids in a New TRL7 Pilot},
  journal = {Energies},
  year = {2025},
  volume = {18},
  number = {3},
  pages = {675},
  doi = {10.3390/en18030675}
}
Kostenlos starten →