EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Study on Heat Leakage, Thermal Stratification, and Self-Pressurization Characteristics in Liquid Helium Storage Tanks

Jing Xu, Fa’an Liu, Jianguo Zhang, Chao Li, Qinghua Liu, Changjun Li, Wenlong Jia, Shixiong Fu, Longjiang Li

Energies · 11.12.2024 · 17 (24) · 6254

DOI: 10.3390/en17246254 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 11.12.2024. Verfasst von Jing Xu und 8 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

During the operation of liquid-phase He-4 (LHe-4) storage tanks, heat leakage changes the thermophysical parameters and phase properties of the LHe-4 in the tanks, resulting in the thermal layering phenomenon. This phenomenon is characterized by the LHe-4 temperature gradient and pressure increase (self-pressurization) phenomena in the tanks. Based on the Layer-by-Layer model, a heat transfer model of a composite adiabatic structure with multilayer insulation and liquid nitrogen screen (LNCS) insulation was established, and the Neumann boundary heat flux of the thermal response model was determined. A numerical simulation model of the thermal response of a liquid helium storage tank was established. The spatial and temporal evolutions of the pressure distribution, natural convection characteristics, thermal stratification characteristics, and self-pressurization characteristics of the LHe-4 tank were investigated. Finally, the self-pressurization thermodynamic model of the LHe-4 storage tank was built based on the isothermal saturation and homogeneous model. It is shown that the predictive performance of the mLee model for the self-boosting characteristics (relative deviation of 14.32%) was significantly improved compared with that of the Lee model (relative deviation of 39.64%). The thermal stratification degree (TSD) of the tank increased with the operation time, with TSDs of 1.023, 1.028, and 1.036 at 1 h, 2 h, and 3 h, which exacerbated the self-pressurization of the tank. The wall surface in contact with the phase interface is a strong evaporation point, so the interfacial mass transfer rate maps show a pattern of high at both ends and low in the middle.

Zitieren

APA

Xu, J., Liu, F., Zhang, J., Li, C., Liu, Q., Li, C., Jia, W., Fu, S., & Li, L. (2024). Numerical Study on Heat Leakage, Thermal Stratification, and Self-Pressurization Characteristics in Liquid Helium Storage Tanks. Energies, 17(24), 6254. https://doi.org/10.3390/en17246254

Vancouver

Xu J, Liu F, Zhang J, Li C, Liu Q, Li C, et al. Numerical Study on Heat Leakage, Thermal Stratification, and Self-Pressurization Characteristics in Liquid Helium Storage Tanks. Energies. 2024;17(24):6254. doi:10.3390/en17246254

BibTeX
@article{Xu2024,
  author = {Xu, Jing and Liu, Fa’an and Zhang, Jianguo and Li, Chao and Liu, Qinghua and Li, Changjun and Jia, Wenlong and Fu, Shixiong and Li, Longjiang},
  title = {Numerical Study on Heat Leakage, Thermal Stratification, and Self-Pressurization Characteristics in Liquid Helium Storage Tanks},
  journal = {Energies},
  year = {2024},
  volume = {17},
  number = {24},
  pages = {6254},
  doi = {10.3390/en17246254}
}
Kostenlos starten →