EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimal Rotor Design for Reducing Electromagnetic Vibration in Traction Motors Based on Numerical Analysis

Seung-Heon Lee, Si-Woo Song, In-Jun Yang, Ju Lee, Won-Ho Kim

Energies · 09.12.2024 · 17 (23) · 6206

DOI: 10.3390/en17236206 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 09.12.2024. Verfasst von Seung-Heon Lee und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Energy Technology Evaluation and Planning (KETEP), Energy Demand Management Core Technology Development Project, Ministry of Trade, Industry, and Energy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Interior permanent magnet synchronous motor (IPMSM) for traction applications have attracted significant attention due to their advantages of high torque and power density as well as a wide operating range. However, these motors suffer from high electromagnetic vibration noise due to their complex structure and structural rigidity. The main sources of this electromagnetic vibration noise are cogging torque, torque ripple, and radial force. To predict electromagnetic vibration noise, finite element analysis (FEA) with flux density analysis of the air gap is essential. This approach allows for the calculation of radial force that is the source of the vibration and enables the prediction of vibration in advance. The data obtained from these analyses provide important guidance for reducing vibration and noise in the design of electric motors. In this paper, the cogging torque and vibration at rated and maximum operating speed are analyzed, and an optimal cogging torque and vibration reduction model, with rotor taper and two-step skew structure, is proposed using the response surface method (RSM) to minimize them. The validity of the proposed model is demonstrated through formulations and FEA based entirely on numerical analysis and results. This study is expected to contribute to the design of more efficient and quieter electric motors by providing a solution to the electromagnetic vibration noise problem generated by IPMSM for traction applications with complex structures.

Förderung

  • Korea Institute of Energy Technology Evaluation and Planning (KETEP)
  • Energy Demand Management Core Technology Development Project
  • Ministry of Trade, Industry, and Energy
  • Korea Energy Technology Evaluation Institute (KETEP)

Zitieren

APA

Lee, S., Song, S., Yang, I., Lee, J., & Kim, W. (2024). Optimal Rotor Design for Reducing Electromagnetic Vibration in Traction Motors Based on Numerical Analysis. Energies, 17(23), 6206. https://doi.org/10.3390/en17236206

Vancouver

Lee S, Song S, Yang I, Lee J, Kim W. Optimal Rotor Design for Reducing Electromagnetic Vibration in Traction Motors Based on Numerical Analysis. Energies. 2024;17(23):6206. doi:10.3390/en17236206

BibTeX
@article{Lee2024,
  author = {Lee, Seung-Heon and Song, Si-Woo and Yang, In-Jun and Lee, Ju and Kim, Won-Ho},
  title = {Optimal Rotor Design for Reducing Electromagnetic Vibration in Traction Motors Based on Numerical Analysis},
  journal = {Energies},
  year = {2024},
  volume = {17},
  number = {23},
  pages = {6206},
  doi = {10.3390/en17236206}
}
Kostenlos starten →