EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design of Flow Fields for High-Temperature PEM Fuel Cells Using Computational Fluid Dynamics

Prantik Roy Chowdhury, Adam C. Gladen

Energies · 30.09.2024 · 17 (19) · 4898

DOI: 10.3390/en17194898 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 30.09.2024. Verfasst von Prantik Roy Chowdhury und 1 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Office of the Secretary of Defense—US Army Ground Vehicle Systems Center.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study proposes novel and modified conventional flow fields for a high-temperature PEM fuel cell, and predicts the fluid dynamic behavior with a 3D, computational fluid dynamics model. Five base flow field patterns (FFPs) are selected: a 4-channel serpentine, a hybrid design, a 2-channel spiral, a dual-triangle sandwich, and a parallel pin-type flow field. For each base FFP, sub-patterns are developed through modification of the channels and ribs. The 4-channel serpentine is taken as the state-of-the-art reference flow field. Simulations are carried out at two different mass flow rates. The result shows that the incorporation of a dead end in flow channels or the merging of channels into a single channel before connecting to the outlet enhances the average and maximum GDL mass flux, but it also increases the pressure drop. The parallel pin-type design-3 and dual-triangle sandwich design-1 exhibit a more even distribution but yield a lower average GDL mass flux than the 4-channel serpentine, which could be beneficial for reducing MEA degradation and thus used at low load conditions where a high mass flux is not needed. In contrast, the uniform hybrid design and 2-channel spiral design-2 provide a higher average and maximum mass flux with a more non-uniform distribution and greater pressure drop. The high average GDL mass flux would be beneficial during high load conditions to ensure enough reactants reach the catalyst.

Förderung

  • Office of the Secretary of Defense—US Army Ground Vehicle Systems Center

Zitieren

APA

Chowdhury, P. R., & Gladen, A. C. (2024). Design of Flow Fields for High-Temperature PEM Fuel Cells Using Computational Fluid Dynamics. Energies, 17(19), 4898. https://doi.org/10.3390/en17194898

Vancouver

Chowdhury PR, Gladen AC. Design of Flow Fields for High-Temperature PEM Fuel Cells Using Computational Fluid Dynamics. Energies. 2024;17(19):4898. doi:10.3390/en17194898

BibTeX
@article{Chowdhury2024,
  author = {Chowdhury, Prantik Roy and Gladen, Adam C.},
  title = {Design of Flow Fields for High-Temperature PEM Fuel Cells Using Computational Fluid Dynamics},
  journal = {Energies},
  year = {2024},
  volume = {17},
  number = {19},
  pages = {4898},
  doi = {10.3390/en17194898}
}
Kostenlos starten →