EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermal Stress in Full-Size Solid Oxide Fuel Cell Stacks by Multi-Physics Modeling

Xueping Zhang, Mingtao Wu, Liusheng Xiao, Hao Wang, Yingqi Liu, Dingrong Ou, Jinliang Yuan

Energies · 25.04.2024 · 17 (9) · 2025

DOI: 10.3390/en17092025 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 25.04.2024. Verfasst von Xueping Zhang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Project of China, Ningbo major special projects of the plan “Science and Technology Innovation 2025”.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mechanical failures in the operating stacks of solid oxide fuel cells (SOFCs) are frequently related to thermal stresses generated by a temperature gradient and its variation. In this study, a computational fluid dynamics (CFD) model is developed and further applied in full-size SOFC stacks, which are fully coupled and implemented for analysis of heat flow electrochemical phenomena, aiming to predict thermal stress distribution. The primary object of the present investigation is to explore features and characteristics of the thermal stress influenced by electrochemical reactions and various transport processes within the stacks. It is revealed that the volume ratio of the higher thermal stress region differs nearly 30% for different stack flow configurations; the highest probability of potential failure appears in the cell cathodes; the more cells applied in the stack, the greater the difference in the predicted temperature/thermal stress between the cells; the counter-flow stack performs the best in terms of output power, but the predicted thermal stress is also higher; the cross-flow stack exhibits the lowest thermal stress and a lower output power; and although the temperature and thermal stress distributions are similar, the differences between the unit cells are bigger in the longer stacks than those predicted for shorter stacks. The findings from this study may provide a useful guide for assessing the thermal behavior and impact on SOFC performance.

Förderung

  • National Key Research and Development Project of China
  • Ningbo major special projects of the plan “Science and Technology Innovation 2025”

Zitieren

APA

Zhang, X., Wu, M., Xiao, L., Wang, H., Liu, Y., Ou, D., & Yuan, J. (2024). Thermal Stress in Full-Size Solid Oxide Fuel Cell Stacks by Multi-Physics Modeling. Energies, 17(9), 2025. https://doi.org/10.3390/en17092025

Vancouver

Zhang X, Wu M, Xiao L, Wang H, Liu Y, Ou D, et al. Thermal Stress in Full-Size Solid Oxide Fuel Cell Stacks by Multi-Physics Modeling. Energies. 2024;17(9):2025. doi:10.3390/en17092025

BibTeX
@article{Zhang2024,
  author = {Zhang, Xueping and Wu, Mingtao and Xiao, Liusheng and Wang, Hao and Liu, Yingqi and Ou, Dingrong and Yuan, Jinliang},
  title = {Thermal Stress in Full-Size Solid Oxide Fuel Cell Stacks by Multi-Physics Modeling},
  journal = {Energies},
  year = {2024},
  volume = {17},
  number = {9},
  pages = {2025},
  doi = {10.3390/en17092025}
}
Kostenlos starten →