Research on Analysis and Suppression Methods of the Bearing Current for Electric Vehicle Motor Driven by SiC Inverter
Energies · 26.02.2024 · 17 (5) · 1109
DOI: 10.3390/en17051109 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energies, online erschienen am 26.02.2024. Verfasst von Mingliang Yang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Research and Development Program of Heilongjiang Province, China, Special Funds for Basic Scientific Research and Operation Expenses of Central Universities, China.
Abstract (Originalsprache)
The silicon carbide (SiC) inverter brings great advantages to the motor drive systems of new energy vehicles; however, severe challenges to the bearings also happen. The high dc bus voltage and switching frequency of SiC inverter can increase the discharge frequency and energy when the bearing grease film collapses. As a result, the bearing suffers severe electric corrosion, and the service life of the motor drive system can be shortened. In this paper, the characteristics of common-mode voltage and bearing voltage are analyzed, firstly under space vector pulse width modulation (SVPWM). After that, the common-mode equivalent circuit model of the motor drive system is established. The frequency characteristics of bearing voltage are revealed, and the safe working area is determined. Then, the frequency characteristics of bearing voltage and current are verified based on IGBT and SiC inverters in experiments. After that, by designing a common-mode filter, the bearing voltage and current are significantly attenuated. Furthermore, the active zero state PWM (AZSPWM) is adopted to reduce the common-mode voltage from the inverter. At the same time, combined with the common-mode filter, the bearing voltage and current are further reduced. The experimental results show that the switching frequency has a decisive effect on the amplitude of bearing voltage and current. The bearing voltage can be attenuated to around half of the reference bearing voltage by using the common-mode filter and AZSPWM strategy, respectively. The combination of the common-mode filter and AZSPWM strategy can reduce the bearing voltage to around one-fourth of the reference bearing voltage, which can effectively reduce the breakdown time and discharge energy of the grease oil film.
Förderung
- Key Research and Development Program of Heilongjiang Province, China
- Special Funds for Basic Scientific Research and Operation Expenses of Central Universities, China
Zitieren
APA
Yang, M., Cheng, Y., Du, B., Li, Y., Wang, S., & Cui, S. (2024). Research on Analysis and Suppression Methods of the Bearing Current for Electric Vehicle Motor Driven by SiC Inverter. Energies, 17(5), 1109. https://doi.org/10.3390/en17051109
Vancouver
Yang M, Cheng Y, Du B, Li Y, Wang S, Cui S. Research on Analysis and Suppression Methods of the Bearing Current for Electric Vehicle Motor Driven by SiC Inverter. Energies. 2024;17(5):1109. doi:10.3390/en17051109
BibTeX
@article{Yang2024,
author = {Yang, Mingliang and Cheng, Yuan and Du, Bochao and Li, Yukuan and Wang, Sibo and Cui, Shumei},
title = {Research on Analysis and Suppression Methods of the Bearing Current for Electric Vehicle Motor Driven by SiC Inverter},
journal = {Energies},
year = {2024},
volume = {17},
number = {5},
pages = {1109},
doi = {10.3390/en17051109}
}
EUVIMED