EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Integrated Waste-to-Energy Process Optimization for Municipal Solid Waste

Hossam A. Gabbar, Muhammad Sajjad Ahmad

Energies · 19.01.2024 · 17 (2) · 497

DOI: 10.3390/en17020497 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 19.01.2024. Verfasst von Hossam A. Gabbar und 1 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NSERC, Mitacs, OCI.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Within the past few decades, thousands of experiments have been performed to characterize urban waste and biomass to estimate their bioenergy potential and product identification. There is a need to develop an integrated process model based on the experimental literature, as well as simulations to obtain suitable products. In this study, municipal solid waste (MSW), including paper and plastic characterization and an integrated process model, were developed to optimize the final products in a reactor system. The process model has two modes, R&D and reactor control (RC), to obtain suitable products including bio-oil, char, and gases. A database was integrated based on thermokinetics, machine learning, and simulation models to optimize product efficiency. The experimental data include those obtained by thermogravimetric analysis and Fourier-transform infrared spectroscopy, which were linked to a pyrolysis experimental setup. Feedstock product mapping models were incorporated into the database along with the temperature, heating rates, elemental analysis, and final product concentration, which were utilized for the pyrolysis reactor setup. Product feasibility was conducted based on life cycle cost, affordability, and product efficiency. The present work will bridge the gap between experimental studies and decision-making based on obtained products under several experimental conditions around the world.

Förderung

  • NSERC
  • Mitacs
  • OCI

Zitieren

APA

Gabbar, H. A., & Ahmad, M. S. (2024). Integrated Waste-to-Energy Process Optimization for Municipal Solid Waste. Energies, 17(2), 497. https://doi.org/10.3390/en17020497

Vancouver

Gabbar HA, Ahmad MS. Integrated Waste-to-Energy Process Optimization for Municipal Solid Waste. Energies. 2024;17(2):497. doi:10.3390/en17020497

BibTeX
@article{Gabbar2024,
  author = {Gabbar, Hossam A. and Ahmad, Muhammad Sajjad},
  title = {Integrated Waste-to-Energy Process Optimization for Municipal Solid Waste},
  journal = {Energies},
  year = {2024},
  volume = {17},
  number = {2},
  pages = {497},
  doi = {10.3390/en17020497}
}
Kostenlos starten →