EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Analytical–Numerical Model for Determining “Drill String–Wellbore” Frictional Interaction Forces

Michał Bembenek, Yaroslav Grydzhuk, Bożena Gajdzik, Liubomyr Ropyak, Mykhaylo Pashechko, Orest Slabyi, Ahmed Al-Tanakchi, Tetiana Pryhorovska

Energies · 07.01.2024 · 17 (2) · 301

DOI: 10.3390/en17020301 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 07.01.2024. Verfasst von Michał Bembenek und 7 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Education of Ukraine.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Currently, drilling of directional oil and gas wells under complex technical-technological and mining-geological conditions requires the use of drill pipes made of various materials. In turn, to choose rational modes of strengthening drill pipes and drill string layouts, information on the contact forces and friction forces of the drill string pipes on boreholes is necessary. Drill pipe curved sections friction with boreholes and drill bit resistance moment changes are the main causes of uneven rotation of a drill string during rotary or combined drilling methods and the occurrence of parametric oscillations. To reduce the cost of mechanical energy for well wiring, it is necessary to take into account the “drill string–borehole rocks” force interaction to estimate the magnitude of the frictional forces and their influence on the technological parameters of the drilling process. To solve this problem, mathematical models of “conventionally vertical and inclined drill string sections–borehole” were built. Based on the industrial data, an analysis of the force interaction of a deformed drill string composed of pipes made of different materials (aluminum, titanium, steel) was carried out. Analytical dependences were obtained for determining the contact forces and friction of the pipes on boreholes. A numerical study of the change of these power factors depending on the depth of the well under conditions of intensive vibration loading was carried out. The amplitude values of these forces, the frequency of their change for good sections, as well as the places for the most rational installation of drill pipes in the layout of the drill string were estimated. It was established that the intensity of contact and friction forces for steel drill pipes is greater than for titanium or aluminum ones. It is shown that the greater impact of a solid steel string on contact forces and frictional forces compared to a layout with sections of titanium or aluminum pipes in the range of vibration frequencies of 8–22 Hz corresponds to a bit rotation frequency of 70–80 rpm. The practical application of the obtained research results will contribute to the improvement of technical and economic indicators of the well drilling process.

Förderung

  • Ministry of Science and Education of Ukraine

Zitieren

APA

Bembenek, M., Grydzhuk, Y., Gajdzik, B., Ropyak, L., Pashechko, M., Slabyi, O., Al-Tanakchi, A., & Pryhorovska, T. (2024). An Analytical–Numerical Model for Determining “Drill String–Wellbore” Frictional Interaction Forces. Energies, 17(2), 301. https://doi.org/10.3390/en17020301

Vancouver

Bembenek M, Grydzhuk Y, Gajdzik B, Ropyak L, Pashechko M, Slabyi O, et al. An Analytical–Numerical Model for Determining “Drill String–Wellbore” Frictional Interaction Forces. Energies. 2024;17(2):301. doi:10.3390/en17020301

BibTeX
@article{Bembenek2024,
  author = {Bembenek, Michał and Grydzhuk, Yaroslav and Gajdzik, Bożena and Ropyak, Liubomyr and Pashechko, Mykhaylo and Slabyi, Orest and Al-Tanakchi, Ahmed and Pryhorovska, Tetiana},
  title = {An Analytical–Numerical Model for Determining “Drill String–Wellbore” Frictional Interaction Forces},
  journal = {Energies},
  year = {2024},
  volume = {17},
  number = {2},
  pages = {301},
  doi = {10.3390/en17020301}
}
Kostenlos starten →