EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermal Simulation and Analysis of Dry-Type Air-Core Reactors Based on Multi-Physics Coupling

Jie Wu, Zhengwei Chang, Huajie Zhang, Man Zhang, Yumin Peng, Jun Liao, Qi Huang

Energies · 06.11.2023 · 16 (21) · 7456

DOI: 10.3390/en16217456 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 06.11.2023. Verfasst von Jie Wu und 6 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: State Grid Sichuan Electric Power Company scientific project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A reactor is an important piece of equipment used for reactive power compensation in power system and has a significant impact on the safe operation of power system. Thermal behavior is one of the main causes of reactor failures. For an accurate analysis of the thermal behavior of reactors, electromagnetic–thermal–fluid multi-physics coupling modeling is chosen. However, there is a huge difference in size between the overall structure of the reactor and its insulating material, which makes it difficult to perform mesh generation, resulting in dense mesh and significantly increased solution degrees of freedom, thus making the solution of the reactor’s multi-physics field model very time-consuming. To address this, this paper proposes a simplified processing method to accelerate the solution calculation of the reactor’s multi-physics model. This method calculates the equivalent turns of each encapsulate with parallel coils in the reactor, simplifying the encapsulate into a single-layer coil, thereby greatly reducing the division and solution degrees of freedom of the multi-physics model, and thus accelerating the simulation calculation. Taking a BKDCKL-20000/35 dry-type air-core shunt reactor as an example, the outer diameter of the coil is nearly 12,000 times bigger than the coil insulation, which is a huge size difference. Both refined models and simplified models are established. Compared to the simulation results of the detailed model, the simplified model demonstrates good accuracy; the maximum relative error of temperature is just 2.19%. Meanwhile, the computational time of the simplified model is reduced by 35.7%, which shows promising effectiveness and significant potential for applying the optimization design and operation prediction of dry-type air-core shunt reactors for enhanced thermal performance.

Förderung

  • State Grid Sichuan Electric Power Company scientific project

Zitieren

APA

Wu, J., Chang, Z., Zhang, H., Zhang, M., Peng, Y., Liao, J., & Huang, Q. (2023). Thermal Simulation and Analysis of Dry-Type Air-Core Reactors Based on Multi-Physics Coupling. Energies, 16(21), 7456. https://doi.org/10.3390/en16217456

Vancouver

Wu J, Chang Z, Zhang H, Zhang M, Peng Y, Liao J, et al. Thermal Simulation and Analysis of Dry-Type Air-Core Reactors Based on Multi-Physics Coupling. Energies. 2023;16(21):7456. doi:10.3390/en16217456

BibTeX
@article{Wu2023,
  author = {Wu, Jie and Chang, Zhengwei and Zhang, Huajie and Zhang, Man and Peng, Yumin and Liao, Jun and Huang, Qi},
  title = {Thermal Simulation and Analysis of Dry-Type Air-Core Reactors Based on Multi-Physics Coupling},
  journal = {Energies},
  year = {2023},
  volume = {16},
  number = {21},
  pages = {7456},
  doi = {10.3390/en16217456}
}
Kostenlos starten →