EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of the Performance of Commercial High Temperature Superconducting Tapes for Dynamo Flux Pump Applications

Giacomo Russo, Antonio Morandi

Energies · 25.10.2023 · 16 (21) · 7244

DOI: 10.3390/en16217244 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 25.10.2023. Verfasst von Giacomo Russo und 1 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High Temperature Superconducting (HTS) dynamo flux pumps are a promising alternative to metal current leads for energization and the persistent current mode operation of high current DC superconducting magnet systems for applications in rotating machines, such as Magnetic Resonance Imaging (MRI) or fusion systems. The viability of the flux pump concept has been widely proven by laboratory experiments and research is now in progress for the design and optimization of flux pump devices for practical applications. It has been widely established that the dependence of the critical current density (Jc) on the temperature (T), the magnetic field magnitude (B), and the orientation (θ), has a substantial impact on the overall DC voltage obtained at the terminals, as well as on the current limit and the loss of the flux pump. Since HTS tapes produced by different manufacturers, they show different dependencies of Jc with the amplitude and the orientation of the magnetic field. They also give rise to different outputs when employed in flux pumps. In this paper, we evaluate and compare the performance of several commercial HTS tapes used for flux pumping purposes through numerical simulation. We also investigate the dependence of the flux pump ‘s performance on the operating temperatures. A 2D finite element numerical model is first developed and validated against experimental data at 77 K. Afterward, the same HTS dynamo apparatus used for validation is exploited for the comparison. The Jc(B,θ,T) and n(B,θ,T) relations, which characterize each different tape in the model, are reconstructed via artificial intelligence techniques based on the open-access database of the Robinson Research Institute. It is shown in the paper that certain tapes are more suitable than others for flux pump applications and that the best overall operating temperature is in the vicinity of 77 K.

Zitieren

APA

Russo, G., & Morandi, A. (2023). Evaluation of the Performance of Commercial High Temperature Superconducting Tapes for Dynamo Flux Pump Applications. Energies, 16(21), 7244. https://doi.org/10.3390/en16217244

Vancouver

Russo G, Morandi A. Evaluation of the Performance of Commercial High Temperature Superconducting Tapes for Dynamo Flux Pump Applications. Energies. 2023;16(21):7244. doi:10.3390/en16217244

BibTeX
@article{Russo2023,
  author = {Russo, Giacomo and Morandi, Antonio},
  title = {Evaluation of the Performance of Commercial High Temperature Superconducting Tapes for Dynamo Flux Pump Applications},
  journal = {Energies},
  year = {2023},
  volume = {16},
  number = {21},
  pages = {7244},
  doi = {10.3390/en16217244}
}
Kostenlos starten →