EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Viable Recycling of Polystyrene via Hydrothermal Liquefaction and Pyrolysis

Sogand Musivand, Maria Paola Bracciale, Martina Damizia, Paolo De Filippis, Benedetta de Caprariis

Energies · 24.06.2023 · 16 (13) · 4917

DOI: 10.3390/en16134917 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 24.06.2023. Verfasst von Sogand Musivand und 4 weiteren Autor:innen. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: POR-FESR Lazio.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Chemical recycling is considered one of the most sustainable solutions to limit the environmental issues related to plastic waste pollution, whereby plastic is converted into more valuable compounds when mechanical recycling is not feasible. Among the most critical fast-growing components of municipal solid waste, polystyrene represents 1/3 of the filling materials in landfills. In this work, the chemical recycling of polystyrene via two main thermochemical processes is investigated: pyrolysis and hydrothermal liquefaction (HTL). The influence of temperature (HTL: 300–360 °C and pyrolysis: 400–600 °C) and reaction time (HTL: 1–4 h; pyrolysis: 30 min) on the products obtained was studied. The obtained liquid and solid products were analyzed by using gas chromatography-mass spectrometry (GC-MS), an elemental analysis (EA), Fourier-transform infrared spectroscopy (FT-IR) and a thermogravimetric analysis (TGA). During HTL, a temperature of 360 °C and reaction time of 4 h were needed to completely decompose the polystyrene into mainly oil (83%) and water-soluble compounds (10%). The former was mainly composed of aromatics while the water phase was mainly composed of aromatics and oxygenated compounds (benzaldehyde and acetophenone). The pyrolysis led to the formation of 45% gas and 55% oil at 500 °C, and the oil was 40% styrene. Pyrolysis was thus more selective towards the recovery of the styrene monomer while the HTL can be an effective process to produce renewable aromatics.

Förderung

  • POR-FESR Lazio

Zitieren

APA

Musivand, S., Bracciale, M. P., Damizia, M., Filippis, P. D., & Caprariis, B. D. (2023). Viable Recycling of Polystyrene via Hydrothermal Liquefaction and Pyrolysis. Energies, 16(13), 4917. https://doi.org/10.3390/en16134917

Vancouver

Musivand S, Bracciale MP, Damizia M, Filippis PD, Caprariis BD. Viable Recycling of Polystyrene via Hydrothermal Liquefaction and Pyrolysis. Energies. 2023;16(13):4917. doi:10.3390/en16134917

BibTeX
@article{Musivand2023,
  author = {Musivand, Sogand and Bracciale, Maria Paola and Damizia, Martina and Filippis, Paolo De and Caprariis, Benedetta de},
  title = {Viable Recycling of Polystyrene via Hydrothermal Liquefaction and Pyrolysis},
  journal = {Energies},
  year = {2023},
  volume = {16},
  number = {13},
  pages = {4917},
  doi = {10.3390/en16134917}
}
Kostenlos starten →