EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Reproducing Transformers’ Frequency Response from Finite Element Method (FEM) Simulation and Parameters Optimization

Regelii Suassuna de Andrade Ferreira, Patrick Picher, Fethi Meghnefi, Issouf Fofana, Hassan Ezzaidi, Christophe Volat, Vahid Behjat

Energies · 27.05.2023 · 16 (11) · 4364

DOI: 10.3390/en16114364 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 27.05.2023. Verfasst von Regelii Suassuna de Andrade Ferreira und 6 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada, InnovÉÉ.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Frequency response analysis (FRA) is being employed worldwide as one of the main methods for the internal condition assessment of transformers due to its capability of detecting mechanical changes. Nonetheless, the objective interpretation of FRA measurements is still a challenge for the industry. This is mainly attributable to the lack of complete data from the same or similar units. A large database of FRA measurements can contribute to improving classification algorithms and lead to a more objective interpretation. Due to their destructive nature, mechanical deformations cannot be performed on real transformers to collect data from different scenarios. The use of simulation and laboratory transformer models is necessary. This research contribution is based on a new method using Finite Element Method simulation and a lumped element circuit to obtain FRA traces from a laboratory model at healthy and faulty states, along with an optimization method to improve capacitive parameters from estimated values. The results show that measured and simulated FRA traces are in good agreement. Furthermore, the faulty FRA traces were analyzed to obtain the characterization of faults based on the variation of the lumped element’s parameters. This supports the use of the proposed method in the generation of faulty frequency response traces and its further use in classifying and localizing faults in the transformer windings. The proposed approach is therefore tailored for generating a larger and unique database of FRA traces with industrial importance and academic significance.

Förderung

  • Natural Sciences and Engineering Research Council of Canada
  • InnovÉÉ

Zitieren

APA

Ferreira, R. S. D. A., Picher, P., Meghnefi, F., Fofana, I., Ezzaidi, H., Volat, C., & Behjat, V. (2023). Reproducing Transformers’ Frequency Response from Finite Element Method (FEM) Simulation and Parameters Optimization. Energies, 16(11), 4364. https://doi.org/10.3390/en16114364

Vancouver

Ferreira RSDA, Picher P, Meghnefi F, Fofana I, Ezzaidi H, Volat C, et al. Reproducing Transformers’ Frequency Response from Finite Element Method (FEM) Simulation and Parameters Optimization. Energies. 2023;16(11):4364. doi:10.3390/en16114364

BibTeX
@article{Ferreira2023,
  author = {Ferreira, Regelii Suassuna de Andrade and Picher, Patrick and Meghnefi, Fethi and Fofana, Issouf and Ezzaidi, Hassan and Volat, Christophe and Behjat, Vahid},
  title = {Reproducing Transformers’ Frequency Response from Finite Element Method (FEM) Simulation and Parameters Optimization},
  journal = {Energies},
  year = {2023},
  volume = {16},
  number = {11},
  pages = {4364},
  doi = {10.3390/en16114364}
}
Kostenlos starten →