Cycle Characteristics of a New High-Temperature Heat Pump Based on Absorption–Compression Revolution
Energies · 23.05.2023 · 16 (11) · 4267
DOI: 10.3390/en16114267 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energies, online erschienen am 23.05.2023. Verfasst von Jian Sun und 5 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
A large amount of the waste heat generated during industrial production is not used, which leads to a low energy utilization rate. The recovery of industrial waste heat using heat pumps has the advantages of low energy consumption, high efficiency, safety, and environmental protection. Industrial waste heat has a wide temperature distribution range. Traditional absorption and compression heat pumps can only work in a narrow temperature range due to the thermodynamic cycle, the thermal properties of the working medium, the temperature and pressure resistance of the compressor, and other factors; they cannot simultaneously meet the requirements of a “high heating temperature” and “wide temperature-range heat transfer”. To solve the above problems, this paper proposes a high-temperature heat pump unit based on a coupled cycle of absorption and compression, which can recover low-temperature steam and 50 °C waste heat and produce hot water at 110–130 °C. EES software is used for the mathematical modeling and simulation analysis of the heat pump unit. The results show that, when the driving steam temperature is 140 °C and the waste heat temperature is 50 °C, the heating temperature can reach 110~130 °C and the COP of the system can reach 4.22. Increasing the waste heat outlet temperature and the condensation temperature of the absorption cycle strengthens the COP of the coupled cycle; meanwhile, increasing the evaporation temperature and heating temperature of the absorption cycle reduces the COP of the coupled cycle. The results of this study significantly broaden the operating temperature range and heating temperature of electric heat pumps; our findings therefore have essential research significance for improving energy efficiency in industrial fields.
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Sun, J., Qin, Y., Liu, R., Wang, G., Liu, D., & Yang, Y. (2023). Cycle Characteristics of a New High-Temperature Heat Pump Based on Absorption–Compression Revolution. Energies, 16(11), 4267. https://doi.org/10.3390/en16114267
Vancouver
Sun J, Qin Y, Liu R, Wang G, Liu D, Yang Y. Cycle Characteristics of a New High-Temperature Heat Pump Based on Absorption–Compression Revolution. Energies. 2023;16(11):4267. doi:10.3390/en16114267
BibTeX
@article{Sun2023,
author = {Sun, Jian and Qin, Yu and Liu, Ran and Wang, Guoshun and Liu, Dingqun and Yang, Yongping},
title = {Cycle Characteristics of a New High-Temperature Heat Pump Based on Absorption–Compression Revolution},
journal = {Energies},
year = {2023},
volume = {16},
number = {11},
pages = {4267},
doi = {10.3390/en16114267}
}
EUVIMED