Carbon Nanotubes as an Alternative to Copper Wires in Electrical Machines: A Review
Energies · 24.04.2023 · 16 (9) · 3665
DOI: 10.3390/en16093665 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energies, online erschienen am 24.04.2023. Verfasst von Vigneselvan Sivasubramaniyam und 4 weiteren Autor:innen. Die Arbeit wurde bisher 43-mal zitiert (Crossref) und nennt 109 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Project PNRR—Sustainable Mobility Centre (CNMS)—CUP, Project PNRR—Interconnected Nord-Est Innovation Ecosystem (iNEST)—CUP.
Abstract (Originalsprache)
The surge in electric vehicles (EVs) and their electrical appliances requires highly efficient, lightweight electrical machines with better performance. However, conventional wire used for electrical machine windings have certain limits to the current requirements. Copper is a commonly used material in electrical windings, and due to its ohmic resistance, it causes 75% of total losses in electrical machines (copper losses). The high mass of the copper results in a bulky system size, and the winding temperature of copper is always maintained at less than 150 °C to preserve the thermal insulation of the electric machine of the windings. On the other hand, carbon nanotubes and carbon nanotube materials have superior electrical conductivity properties and mechanical properties. Carbon nanotubes ensure 100 MS/m of electrical conductivity, which is higher than the copper electrical conductivity of 59.6 MS/m. In the literature, various carbon nanotubes have been studied based on electrical conductivity, temperature co-efficient with resistivity, material thickness and strength, insulation, and efficiency of the materials. Here, we review the electrical and mechanical properties of carbon nanotubes, and carbon nanotube composite materials are reviewed with copper windings for electrical wires.
Förderung
- Project PNRR—Sustainable Mobility Centre (CNMS)—CUP
- Project PNRR—Interconnected Nord-Est Innovation Ecosystem (iNEST)—CUP
Zitieren
APA
Sivasubramaniyam, V., Ramasamy, S., Venkatraman, M., Gatto, G., & Kumar, A. (2023). Carbon Nanotubes as an Alternative to Copper Wires in Electrical Machines: A Review. Energies, 16(9), 3665. https://doi.org/10.3390/en16093665
Vancouver
Sivasubramaniyam V, Ramasamy S, Venkatraman M, Gatto G, Kumar A. Carbon Nanotubes as an Alternative to Copper Wires in Electrical Machines: A Review. Energies. 2023;16(9):3665. doi:10.3390/en16093665
BibTeX
@article{Sivasubramaniyam2023,
author = {Sivasubramaniyam, Vigneselvan and Ramasamy, Suganthi and Venkatraman, Manikandan and Gatto, Gianluca and Kumar, Amit},
title = {Carbon Nanotubes as an Alternative to Copper Wires in Electrical Machines: A Review},
journal = {Energies},
year = {2023},
volume = {16},
number = {9},
pages = {3665},
doi = {10.3390/en16093665}
}
EUVIMED