Numerical Analysis of In Situ Conversion Process of Oil Shale Formation Based on Thermo-Hydro-Chemical Coupled Modelling
Energies · 21.02.2023 · 16 (5) · 2103
DOI: 10.3390/en16052103 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energies, online erschienen am 21.02.2023. Verfasst von Juan Jin und 8 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: PetroChina RIPED.
Abstract (Originalsprache)
The in situ conversion process (ICP) is a retorting method pyrolyzing the kerogen in shale into oil and gas products, which shows great potential to promote the recovery of oil shale resources. In this work, a thermo-hydro-chemical-coupled model for the in situ conversion process is established, considering the temperature dependence of key properties and the transverse isotropy caused by the layered characteristics of oil shale. Based on the proposed model, a series of simulations is conducted to evaluate the production performance of the in situ conversion process of oil shale reservoirs. The results indicate that energy efficiency reaches a maximum of 2.7 around the fifth year of the heating process, indicating the feasibility of in situ conversion technology. Furthermore, the sensitivity analysis shows that the heating temperature should be higher than 300 °C to avoid the energy output being less than the energy input, and the oil/gas ratio decreases with increasing heating temperature. Moreover, thermal conductivity is positively with production while heat capacity is negatively correlated, and the energy efficiency decreases with increasing thermal conductivity and matrix heat capacity. Finally, the heating period should be no longer than 4 years to maximize the heating efficiency.
Förderung
- PetroChina RIPED
Zitieren
APA
Jin, J., Jiang, W., Liu, J., Shi, J., Zhang, X., Cheng, W., Yu, Z., Chen, W., & Ye, T. (2023). Numerical Analysis of In Situ Conversion Process of Oil Shale Formation Based on Thermo-Hydro-Chemical Coupled Modelling. Energies, 16(5), 2103. https://doi.org/10.3390/en16052103
Vancouver
Jin J, Jiang W, Liu J, Shi J, Zhang X, Cheng W, et al. Numerical Analysis of In Situ Conversion Process of Oil Shale Formation Based on Thermo-Hydro-Chemical Coupled Modelling. Energies. 2023;16(5):2103. doi:10.3390/en16052103
BibTeX
@article{Jin2023,
author = {Jin, Juan and Jiang, Weidong and Liu, Jiandong and Shi, Junfeng and Zhang, Xiaowen and Cheng, Wei and Yu, Ziniu and Chen, Weixi and Ye, Tingfu},
title = {Numerical Analysis of In Situ Conversion Process of Oil Shale Formation Based on Thermo-Hydro-Chemical Coupled Modelling},
journal = {Energies},
year = {2023},
volume = {16},
number = {5},
pages = {2103},
doi = {10.3390/en16052103}
}
EUVIMED