EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Power Electronics Converters for Electric Vehicle Auxiliaries: State of the Art and Future Trends

Ramy Kotb, Sajib Chakraborty, Dai-Duong Tran, Ekaterina Abramushkina, Mohamed El Baghdadi, Omar Hegazy

Energies · 09.02.2023 · 16 (4) · 1753

DOI: 10.3390/en16041753 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 09.02.2023. Verfasst von Ramy Kotb und 5 weiteren Autor:innen. Die Arbeit wurde bisher 64-mal zitiert (Crossref) und nennt 147 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: VUB PhD scholarship.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electric vehicles (EVs) are expected to take over the transportation and mobility market over traditional internal combustion engine (ICE) vehicles soon. The internal power demands of EVs are expected to increase. The reason for this is to achieve a longer driving range for the EV and to provide the required power for the low-voltage (LV) network auxiliary loads. To illustrate, there are extra added sensors, cameras, and small actuating motors, especially for future autonomous vehicles. Therefore, a new electrical/electronic (E/E) architecture is required to convert the high-voltage (HV) traction battery voltage (e.g., 320–800 V DC) to the standard LV levels with high current ratings of 5 kW and more. This HV-LV DC-DC converter is known in the literature as an auxiliary power module (APM). The standard LV rails in an EV are the 12 V/24 V rail to supply for an instant the EV’s lighting and electronic control units (ECUs), while the 48 V rail is required for propulsive loads, such as air compressors and electric power steering systems. Furthermore, in a few applications, this converter is responsible for voltage upwards to support the start of a hybrid vehicle or emergency backup power handling, which requires bidirectional capability. Therefore, in this paper, possible APM topologies for EV applications are presented. In line with this, the main standards and safety requirements of the APMs are presented. Detailed quantitative and qualitative comparisons between topologies and their associated control schemes are discussed. In addition, the placement of the APM in the EV cooling cycle has been investigated and demonstrated. Finally, the industrial trends and future research targets for the APM in automotive applications are outlined.

Förderung

  • VUB PhD scholarship

Zitieren

APA

Kotb, R., Chakraborty, S., Tran, D., Abramushkina, E., Baghdadi, M. E., & Hegazy, O. (2023). Power Electronics Converters for Electric Vehicle Auxiliaries: State of the Art and Future Trends. Energies, 16(4), 1753. https://doi.org/10.3390/en16041753

Vancouver

Kotb R, Chakraborty S, Tran D, Abramushkina E, Baghdadi ME, Hegazy O. Power Electronics Converters for Electric Vehicle Auxiliaries: State of the Art and Future Trends. Energies. 2023;16(4):1753. doi:10.3390/en16041753

BibTeX
@article{Kotb2023,
  author = {Kotb, Ramy and Chakraborty, Sajib and Tran, Dai-Duong and Abramushkina, Ekaterina and Baghdadi, Mohamed El and Hegazy, Omar},
  title = {Power Electronics Converters for Electric Vehicle Auxiliaries: State of the Art and Future Trends},
  journal = {Energies},
  year = {2023},
  volume = {16},
  number = {4},
  pages = {1753},
  doi = {10.3390/en16041753}
}
Kostenlos starten →