Numerical Investigation of the Effects of the Hole Inclination Angle and Blowing Ratio on the Characteristics of Cooling and Stress in an Impingement/Effusion Cooling System
Energies · 13.01.2023 · 16 (2) · 937
DOI: 10.3390/en16020937 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energies, online erschienen am 13.01.2023. Verfasst von Haiwang Li und 4 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Science and Technology Major Project, Defense Industrial Technology Development Program.
Abstract (Originalsprache)
Due to the uneven temperature field and temperature gradient introduced by an efficient cooling structure, the analysis of the stress field is necessary. In this study, the cooling characteristics and stress characteristics such as the thermal stress and thermomechanical stress of an impingement/effusion cooling system were investigated by employing a fluid–thermal-structure coupling simulation method. The effects of film hole injection angle (30°–90°) and blowing ratio (0.5–2.0) were studied. The results showed that the film hole shape and the non-uniform temperature field introduced by the cooling structure had a great influence on the stress field distribution. With the increase in the blowing ratio, not only the overall cooling effectiveness of the cooling system increased, but the maximum thermal stress and thermomechanical stress near film holes also increased. The cases with a smaller inclination angle could provide a better cooling performance, but caused a more serious stress concentration of the film hole. However, the thermal stress difference at the leading and trailing edges of the film hole increased with a decreasing inclination angle. The cases with a = 30° and 45° showed serious thermal stress concentration near the hole’s acute region.
Förderung
- National Natural Science Foundation of China
- National Science and Technology Major Project
- Defense Industrial Technology Development Program
Zitieren
APA
Li, H., Zhang, D., You, R., Zou, Y., & Liu, S. (2023). Numerical Investigation of the Effects of the Hole Inclination Angle and Blowing Ratio on the Characteristics of Cooling and Stress in an Impingement/Effusion Cooling System. Energies, 16(2), 937. https://doi.org/10.3390/en16020937
Vancouver
Li H, Zhang D, You R, Zou Y, Liu S. Numerical Investigation of the Effects of the Hole Inclination Angle and Blowing Ratio on the Characteristics of Cooling and Stress in an Impingement/Effusion Cooling System. Energies. 2023;16(2):937. doi:10.3390/en16020937
BibTeX
@article{Li2023,
author = {Li, Haiwang and Zhang, Dawei and You, Ruquan and Zou, Yifan and Liu, Song},
title = {Numerical Investigation of the Effects of the Hole Inclination Angle and Blowing Ratio on the Characteristics of Cooling and Stress in an Impingement/Effusion Cooling System},
journal = {Energies},
year = {2023},
volume = {16},
number = {2},
pages = {937},
doi = {10.3390/en16020937}
}
EUVIMED