Thermal Effects in the End-Winding Region of Electrical Machines
Energies · 13.01.2023 · 16 (2) · 930
DOI: 10.3390/en16020930 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energies, online erschienen am 13.01.2023. Verfasst von Mario Vukotić und 4 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union.
Abstract (Originalsprache)
The main heat transfer mechanism in the end-winding region of electrical machines is convection. In order to increase the air motion, the rotor is equipped with a series of blades. Their geometry is reflected in the fanning factor, i.e., the ratio between the rotor peripheral speed and air velocity. An accurate calculation procedure for the fanning factor has not yet been given. Knowing its value is crucial for the determination of air velocity and heat transfer coefficient (HTC), as the latter describes the end-winding heat removal capability. In this study, the convective heat transfer phenomena between the end winding and air inside the end-winding region were analyzed, with the heat generated only in the end winding, mimicked with a custom designed coil, and air moved by the blades. The analysis was performed by experimental testing and computational fluid dynamics (CFD) modeling. Measurements data were used to build a reliable CFD model. Further on, CFD results were used to derive a generalized analytical equation for calculation of the end-winding HTC, related to blade geometry and rotor rotational speed. The developed analytical model significantly improves the quality of real-time lumped circuit thermal modeling of electrical machines and, thus, enriches this field of science.
Förderung
- European Union
Zitieren
APA
Vukotić, M., Lutovski, S., Šutar, N., Miljavec, D., & Čorović, S. (2023). Thermal Effects in the End-Winding Region of Electrical Machines. Energies, 16(2), 930. https://doi.org/10.3390/en16020930
Vancouver
Vukotić M, Lutovski S, Šutar N, Miljavec D, Čorović S. Thermal Effects in the End-Winding Region of Electrical Machines. Energies. 2023;16(2):930. doi:10.3390/en16020930
BibTeX
@article{Vukoti2023,
author = {Vukotić, Mario and Lutovski, Stefan and Šutar, Nina and Miljavec, Damijan and Čorović, Selma},
title = {Thermal Effects in the End-Winding Region of Electrical Machines},
journal = {Energies},
year = {2023},
volume = {16},
number = {2},
pages = {930},
doi = {10.3390/en16020930}
}
EUVIMED