Multi-Label Recognition of Composite Electromagnetic Interference for ILS Localizer Monitoring: Measurement- Constrained Modeling and Robustness Evaluation
Electronics · 20.11.2026 · 15 (22) · 5417
DOI: 10.3390/electronics15225417 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electronics, online erschienen am 20.11.2026. Verfasst von Shengjie Wang und 6 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Sichuan Province Civil Aviation Flight Technology and Flight Safety Engineering Technology Research Center, CAAC Academy of Flight Technology and Safety, University-Level Undergraduate Innovation Training Program.
Abstract (Originalsprache)
Overlapping transient, narrowband, and broadband electromagnetic interference complicates the identification of concurrent sources affecting Instrument Landing System (ILS) Localizer signals. This study develops a measurement-constrained framework for composite interference modeling, multi-label recognition, and evaluation of robustness to source-model formulation. Archived field and controlled-source measurements guide equivalent-baseband models of pantograph–catenary arcs, high-voltage power-line interference, illegal broadcasts, mobile-phone jammers, and aging runway-light interference, but are not used as labeled learning samples. Source-wise protection-ratio control produces clean, single-source, and composite synthetic spectrograms in ACE-ILS-MI. The Spectrogram-Native Residual Network (SNRN) achieves a Macro-F1 of 0.9215 on its held-out synthetic test set. In a separate robustness study, paired source-factorized training achieves mean-world and worst-world Macro-F1 values of 0.9420 and 0.9210 on a sealed 32-world synthetic panel, and 0.8905 on an unseen-generator-family synthetic holdout. Cross-factorial and matched-view analyses associate the robustness gains primarily with generator-randomized training and additional view exposure, rather than attention or one-source-flip pairing. One unlabeled measured in-phase/quadrature (IQ) recording provides a preprocessing and inference compatibility check, not a recognition-accuracy estimate. The framework supports controlled analysis of composite-source recognition and generator-dependent performance; quantitative validation on labeled field data remains necessary.
Förderung
- Sichuan Province Civil Aviation Flight Technology and Flight Safety Engineering Technology Research Center
- CAAC Academy of Flight Technology and Safety
- University-Level Undergraduate Innovation Training Program
- CAAC Safety Capacity Building Project
- Anhui Provincial Science and Technology Innovation Key Program
Zitieren
APA
Wang, S., Wang, Y., Yang, X., Chen, Y., Wang, J., Yang, L., & Dai, A. (2026). Multi-Label Recognition of Composite Electromagnetic Interference for ILS Localizer Monitoring: Measurement- Constrained Modeling and Robustness Evaluation. Electronics, 15(22), 5417. https://doi.org/10.3390/electronics15225417
Vancouver
Wang S, Wang Y, Yang X, Chen Y, Wang J, Yang L, et al. Multi-Label Recognition of Composite Electromagnetic Interference for ILS Localizer Monitoring: Measurement- Constrained Modeling and Robustness Evaluation. Electronics. 2026;15(22):5417. doi:10.3390/electronics15225417
BibTeX
@article{Wang2026,
author = {Wang, Shengjie and Wang, Yuanxu and Yang, Xiaojia and Chen, Yaqing and Wang, Jiqian and Yang, Liangyong and Dai, Anzhe},
title = {Multi-Label Recognition of Composite Electromagnetic Interference for ILS Localizer Monitoring: Measurement- Constrained Modeling and Robustness Evaluation},
journal = {Electronics},
year = {2026},
volume = {15},
number = {22},
pages = {5417},
doi = {10.3390/electronics15225417}
}
EUVIMED