EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Model-in-the-Loop Validation of Data-Driven Predictive Electrical Load Control for a Laboratory-Scale Wind Turbine

Batın Demircan

Electronics · 20.11.2026 · 15 (22) · 5411

DOI: 10.3390/electronics15225411 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronics, online erschienen am 20.11.2026. Verfasst von Batın Demircan. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study develops a constrained, quasi-steady-state predictive electrical-load optimizer for maximum power point tracking in a laboratory-scale wind turbine. An artificial neural network power model, identified from experimental measurements, serves as the prediction engine: wind speed is the disturbance, the pitch angle is an offline configuration parameter, and the electrical-load command is the control input. A measurement matrix of nine wind speeds at the reference pitch (60°) and three speeds at each of three further angles (30°, 45°, 75°), with ten load levels, defined 180 conditions over two repetitions. One low-power condition was excluded, leaving 179 valid conditions (358 measurements). Repetition differences averaged 2.59% overall (3.53% reference, 1.65% further angles). A multi-layer perceptron using wind speed, load, and pitch angle attained R2 = 0.997 on the test set, and a SHAP analysis attributed 41% each to wind speed and pitch angle and 18% to load. Across the evaluated changing-pitch configurations, the optimizer achieved 96.1% mean power-capture efficiency, marginally exceeding the 2-percentage-point P&O baseline (95.8%). On fully held-out operating conditions, the retrained optimizer achieved 96.9% ± 1.3%, compared with 98.2% for model-free P&O. The identified first-order wind-side model reproduced an unseen multi-step wind profile with R2 = 0.978.

Zitieren

APA

Demircan, B. (2026). Design and Model-in-the-Loop Validation of Data-Driven Predictive Electrical Load Control for a Laboratory-Scale Wind Turbine. Electronics, 15(22), 5411. https://doi.org/10.3390/electronics15225411

Vancouver

Demircan B. Design and Model-in-the-Loop Validation of Data-Driven Predictive Electrical Load Control for a Laboratory-Scale Wind Turbine. Electronics. 2026;15(22):5411. doi:10.3390/electronics15225411

BibTeX
@article{Demircan2026,
  author = {Demircan, Batın},
  title = {Design and Model-in-the-Loop Validation of Data-Driven Predictive Electrical Load Control for a Laboratory-Scale Wind Turbine},
  journal = {Electronics},
  year = {2026},
  volume = {15},
  number = {22},
  pages = {5411},
  doi = {10.3390/electronics15225411}
}
Kostenlos starten →