EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An 868/915 MHz Transmitter in 90 nm BCD Technology for Embedded Wireless Communication in Smart-Power ICs

Nunzio Spina, Alessandro Castorina, Giuseppe Papotto

Electronics · 17.11.2026 · 15 (22) · 5342

DOI: 10.3390/electronics15225342 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronics, online erschienen am 17.11.2026. Verfasst von Nunzio Spina und 2 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a dual-band sub-GHz transmitter in a 90 nm BCD technology proposing circuit solutions that enable wireless connectivity in a non-RF platform. The proposed device is meant to be a first demonstrator of a monolithic I/Q RF front-end to be embedded in smart-power ICs. It includes a 2 GHz voltage-controlled oscillator (VCO) exploiting a complementary cross-coupled LC-tank topology with a digitally controlled capacitor bank for coarse tuning and an NMOS varactor for fine tuning to achieve wide tuning range while simultaneously limiting the VCO frequency gain for an optimized trade-off between phase noise performance and current consumption. The VCO drives a divide-by-two stage, which simultaneously provides I/Q signals and the RF carrier for the output buffer. It exhibits a tuning range spanning from 1.63 GHz to 1.98 GHz, which allows covering both EU and US ISM bands at 868 MHz and 915 MHz, respectively, and draws 2 mA from the 1.2 V supply voltage. The measured phase noise performance is as low as −110 dBc/Hz and −111 dBc/Hz at 1 MHz offset from the 1.74 GHz and 1.83 GHz oscillation frequencies, respectively. After the divide-by-two operation the phase noise of the corresponding transmitted carrier scales down to −116 dBc/Hz and −117 dBc/Hz at 1 MHz frequency offset from 868 MHz and 915 MHz, respectively. The RF buffer delivers through an external matching network of 3.6 dBm of output power to the 50 Ω antenna, enabling short-range wireless connectivity in smart-power platforms with a low-cost implementation.

Zitieren

APA

Spina, N., Castorina, A., & Papotto, G. (2026). An 868/915 MHz Transmitter in 90 nm BCD Technology for Embedded Wireless Communication in Smart-Power ICs. Electronics, 15(22), 5342. https://doi.org/10.3390/electronics15225342

Vancouver

Spina N, Castorina A, Papotto G. An 868/915 MHz Transmitter in 90 nm BCD Technology for Embedded Wireless Communication in Smart-Power ICs. Electronics. 2026;15(22):5342. doi:10.3390/electronics15225342

BibTeX
@article{Spina2026,
  author = {Spina, Nunzio and Castorina, Alessandro and Papotto, Giuseppe},
  title = {An 868/915 MHz Transmitter in 90 nm BCD Technology for Embedded Wireless Communication in Smart-Power ICs},
  journal = {Electronics},
  year = {2026},
  volume = {15},
  number = {22},
  pages = {5342},
  doi = {10.3390/electronics15225342}
}
Kostenlos starten →