Collaborative Trajectory Planning and Tracking Control for Wind Turbine Blade Mountain Transport Vehicles
Electronics · 24.07.2026 · 15 (15) · 3268
DOI: 10.3390/electronics15153268 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electronics, online erschienen am 24.07.2026. Verfasst von Huaxin Yu und 7 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Central Government-Guided Local Science and Technology Development Fund.
Abstract (Originalsprache)
This paper investigates collaborative trajectory planning and tracking control for semi-trailer-mounted lifting vehicles used in wind turbine blade transport on complex mountainous roads. The proposed approach addresses the challenging problem of coordinating the articulated chassis with a three-degree-of-freedom upper operating device during ultra-long blade transport. First, a unified kinematic model of the articulated chassis and the three-degree-of-freedom upper operating device is established for collaborative trajectory planning and tracking control under low-speed transport conditions. In addition, a dynamic formulation is provided to describe the inertial coupling characteristics of the vehicle-blade system. Second, a continuous trajectory planning method driven by task gradients is proposed to generate collision-free trajectories satisfying multiple constraints, including kinematic feasibility, obstacle avoidance, and actuator limits. A damping injection strategy is introduced to improve numerical conditioning during the iterative optimization process. Third, a linear time-varying model predictive controller is designed based on local linearization along the reference trajectory, which handles system constraints explicitly and achieves high-precision trajectory tracking. Simulation and hardware-in-the-loop experiments show that the proposed method generates smooth and feasible trajectories, while the tracking controller achieves engineering-level position accuracy and joint-angle tracking errors below 3 degrees, satisfying practical requirements for wind turbine blade transport on mountainous roads.
Förderung
- National Natural Science Foundation of China
- Central Government-Guided Local Science and Technology Development Fund
Zitieren
APA
Yu, H., Wang, J., Wang, M., Sun, D., Zhang, B., Tian, H., Wang, Y., & Zhang, Y. (2026). Collaborative Trajectory Planning and Tracking Control for Wind Turbine Blade Mountain Transport Vehicles. Electronics, 15(15), 3268. https://doi.org/10.3390/electronics15153268
Vancouver
Yu H, Wang J, Wang M, Sun D, Zhang B, Tian H, et al. Collaborative Trajectory Planning and Tracking Control for Wind Turbine Blade Mountain Transport Vehicles. Electronics. 2026;15(15):3268. doi:10.3390/electronics15153268
BibTeX
@article{Yu2026,
author = {Yu, Huaxin and Wang, Jiaheng and Wang, Mingyang and Sun, Dengyue and Zhang, Boqiang and Tian, Hualiang and Wang, Yinshu and Zhang, Yahui},
title = {Collaborative Trajectory Planning and Tracking Control for Wind Turbine Blade Mountain Transport Vehicles},
journal = {Electronics},
year = {2026},
volume = {15},
number = {15},
pages = {3268},
doi = {10.3390/electronics15153268}
}
EUVIMED