Thick Metal Film Patterning by Bi-Layer Lift-Off Process for MEMS Application
Electronics · 24.07.2026 · 15 (15) · 3259
DOI: 10.3390/electronics15153259 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electronics, online erschienen am 24.07.2026. Verfasst von Yiyi Hong und 7 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Project of State Grid Corporation of China.
Abstract (Originalsprache)
An integrated spray-coated bi-layer lift-off process using the same positive photoresist is investigated for thick Ti patterning on structured MEMS wafers. Compared with conventional spin coating, spray coating provides more conformal photoresist coverage on wafers with 30–50 µm surface topography and reduces the local top–bottom thickness variation from approximately 30% to below 5%. By combining spray coating, heated-chuck drying, and flood exposure of the first resist layer, the integrated process improves thickness retention of the bi-layer resist and enables controlled lateral dissolution during development. After optimizing the development time, a lateral undercut of approximately 3.5 µm was obtained, which is consistent with the expected “T-shaped” resist profile. Representative 600 nm thick Ti patterns were fabricated on structured silicon wafers using this process. The results indicate that the proposed process is a feasible route for local thick-metal patterning on structured MEMS substrates under the present experimental conditions.
Förderung
- Science and Technology Project of State Grid Corporation of China
Zitieren
APA
Hong, Y., Zhu, Y., Niu, B., Li, J., Yang, Y., Zhu, X., Guo, D., & Wang, S. (2026). Thick Metal Film Patterning by Bi-Layer Lift-Off Process for MEMS Application. Electronics, 15(15), 3259. https://doi.org/10.3390/electronics15153259
Vancouver
Hong Y, Zhu Y, Niu B, Li J, Yang Y, Zhu X, et al. Thick Metal Film Patterning by Bi-Layer Lift-Off Process for MEMS Application. Electronics. 2026;15(15):3259. doi:10.3390/electronics15153259
BibTeX
@article{Hong2026,
author = {Hong, Yiyi and Zhu, Yinfang and Niu, Bo and Li, Jinchao and Yang, Yong and Zhu, Xiaoqin and Guo, Dapeng and Wang, Shuaipeng},
title = {Thick Metal Film Patterning by Bi-Layer Lift-Off Process for MEMS Application},
journal = {Electronics},
year = {2026},
volume = {15},
number = {15},
pages = {3259},
doi = {10.3390/electronics15153259}
}
EUVIMED