EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Obstacle Avoidance Trajectory Planning and Accurate Tracking Control Method for Tower Cranes Based on Piecewise Bezier Curves

Xianghua Ma, Xutao Zhou, Zhiheng Liu, Yanhong Li

Electronics · 21.07.2026 · 15 (14) · 3204

DOI: 10.3390/electronics15143204 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronics, online erschienen am 21.07.2026. Verfasst von Xianghua Ma und 3 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In complex environments, tower cranes not only need to efficiently transport loads to specified target points but also must avoid obstacles present in their surroundings. This poses a significant challenge for the load positioning control of tower cranes. To tackle this problem, an accurate model-based approach is developed for trajectory planning and tracking control, enabling both obstacle avoidance and precise load positioning during the crane’s lifting process. Specifically, the paper formulates smooth parameterized load trajectories in the tower crane task space using piecewise Bézier curves. The positions of curve control points are designed to allow independent adjustment of each trajectory segment, thus avoiding obstacles during load movement and ensuring operational safety. A novel method for defining the load swing angle is introduced, which employs the system’s differential flatness to map the smooth parameterized trajectories from the task space to the system’s generalized state space without requiring model linearization, thereby ensuring the designed trajectories’ precision and traceability. A meticulously designed high-order sliding mode controller is employed to ensure the jib and trolley accurately follow the prescribed reference trajectory, while effectively suppressing load swing angle, thereby achieving precise load positioning. Finally, the proposed control strategy was tested on a tower crane experimental platform. Experimental validation reveals that the maximum radial swing angle is limited to 3.264°, while the maximum slew swing angle reaches 3.599°, with residual oscillations reduced to 0.425° and 0.343°, respectively. Compared with conventional input-shaping methods, the maximum radial swing and residual oscillation are reduced by 72.7% and 88.9%, respectively. These results demonstrate that the designed trajectory planning and tracking control strategy enables the tower crane load to avoid obstacles smoothly and position precisely at the target point.

Zitieren

APA

Ma, X., Zhou, X., Liu, Z., & Li, Y. (2026). Research on Obstacle Avoidance Trajectory Planning and Accurate Tracking Control Method for Tower Cranes Based on Piecewise Bezier Curves. Electronics, 15(14), 3204. https://doi.org/10.3390/electronics15143204

Vancouver

Ma X, Zhou X, Liu Z, Li Y. Research on Obstacle Avoidance Trajectory Planning and Accurate Tracking Control Method for Tower Cranes Based on Piecewise Bezier Curves. Electronics. 2026;15(14):3204. doi:10.3390/electronics15143204

BibTeX
@article{Ma2026,
  author = {Ma, Xianghua and Zhou, Xutao and Liu, Zhiheng and Li, Yanhong},
  title = {Research on Obstacle Avoidance Trajectory Planning and Accurate Tracking Control Method for Tower Cranes Based on Piecewise Bezier Curves},
  journal = {Electronics},
  year = {2026},
  volume = {15},
  number = {14},
  pages = {3204},
  doi = {10.3390/electronics15143204}
}
Kostenlos starten →