EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Self-Decoupled Dual-Band MIMO Antenna for UAV Applications

Yiming Huang, Yu Lu, Jun Dong, Pu Ren, Yan Fang, Lingsheng Yang

Electronics · 24.06.2026 · 15 (13) · 2789

DOI: 10.3390/electronics15132789 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronics, online erschienen am 24.06.2026. Verfasst von Yiming Huang und 5 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To satisfy the demands of 5G communication and reliable data connectivity for unmanned aerial vehicles (UAVs), a novel two-element dual-band MIMO antenna with an inherent self-decoupling property based on orthogonal linear polarization diversity is proposed. Distinct from conventional designs relying on extra decoupling components, the antenna realizes isolation enhancement via coupled currents between annular strips and S-shaped strips without additional decoupling structures, representing the core design novelty. Fabricated on a low-cost 1.6 mm thick FR4 substrate, the antenna features compact overall dimensions of 60 mm × 30 mm × 1.6 mm, covering the 2.40–2.73 GHz ISM band and 3.38–3.63 GHz 5G Sub-6 GHz band. Measured results demonstrate that the reflection coefficient remains below −10 dB across the entire operating bands, with port isolation exceeding 27 dB for the 2.4 GHz band and 20 dB for the 3.5 GHz 5G band. The measured realized gain is 0.7–1.5 dB in the lower band and 2.3–2.9 dB in the upper band. The radiation efficiency, which is obtained exclusively from ANSYS HFSS 2025 R1 simulation, is higher than 90% for the lower band and over 80% for the upper band. The calculated envelope correlation coefficient (ECC) is less than 0.15 throughout the working bandwidth, which effectively suppresses inter-channel electromagnetic interference and mitigates channel fading caused by varying UAV attitudes to improve system channel capacity. Further verifications via epoxy encapsulation and co-simulation on an eight-rotor UAV platform prove slight frequency drift after packaging and installation, whereas its bandwidth and isolation still meet practical engineering requirements. Benefiting from a compact layout and omnidirectional radiation performance, the proposed low-cost MIMO antenna is convenient for conformal integration into a UAV fuselage, improving the practicability of UAV-aided emergency communication, equipment inspection and 5G network coverage.

Zitieren

APA

Huang, Y., Lu, Y., Dong, J., Ren, P., Fang, Y., & Yang, L. (2026). A Self-Decoupled Dual-Band MIMO Antenna for UAV Applications. Electronics, 15(13), 2789. https://doi.org/10.3390/electronics15132789

Vancouver

Huang Y, Lu Y, Dong J, Ren P, Fang Y, Yang L. A Self-Decoupled Dual-Band MIMO Antenna for UAV Applications. Electronics. 2026;15(13):2789. doi:10.3390/electronics15132789

BibTeX
@article{Huang2026,
  author = {Huang, Yiming and Lu, Yu and Dong, Jun and Ren, Pu and Fang, Yan and Yang, Lingsheng},
  title = {A Self-Decoupled Dual-Band MIMO Antenna for UAV Applications},
  journal = {Electronics},
  year = {2026},
  volume = {15},
  number = {13},
  pages = {2789},
  doi = {10.3390/electronics15132789}
}
Kostenlos starten →