Sine-Wave Filter Design Method for High-Speed PMSMs in High-Frequency (250 Hz) Drives
Electronics · 10.06.2026 · 15 (12) · 2568
DOI: 10.3390/electronics15122568 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electronics, online erschienen am 10.06.2026. Verfasst von Genmao Zhou und 6 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Power quality evaluation and motor-end overvoltage suppression technology application for variable frequency drive system of submersible pumps in in-situ leach….
Abstract (Originalsprache)
In industrial applications such as in situ leaching and uranium mining, permanent magnet synchronous motors (PMSMs) for submersible pumps are frequently connected to frequency converters via long cables. During this long-distance transmission, traveling wave reflections induced by high-frequency pulse width modulation (PWM) generate severe transient overvoltages that threaten motor insulation. Because installation space at deep-well motor terminals is severely restricted, overvoltage suppression must be implemented at the inverter output. Here, the parameter design and optimization of a passive LC filter specifically developed for 250 Hz high-frequency PMSMs are presented. The optimal inductance and capacitance parameters were determined by balancing multiple operational constraints, including fundamental voltage drop, high-frequency harmonic attenuation, and the avoidance of low-order harmonic resonance. Furthermore, the anti-saturation performance of the magnetic core material, evaluated thermal characteristics through electromagnetic-thermal co-simulation, and analyzed the risk of self-excited oscillation between the filter capacitors and the motor was analyzed. Finally, hardware experiments conducted on a 20 m cable test bench validate that the designed LC filter effectively mitigates terminal overvoltage. The peak terminal voltage was reduced from 900 V to 505 V, and total harmonic distortion (THD) was limited to below 5%. This design provides a highly reliable, space-efficient solution for overvoltage suppression in high-speed, long-cable motor drive systems.
Förderung
- Power quality evaluation and motor-end overvoltage suppression technology application for variable frequency drive system of submersible pumps in in-situ leach…
Zitieren
APA
Zhou, G., Ding, Y., Du, Z., Tang, Y., Chen, L., Yang, G., & Zhang, G. (2026). Sine-Wave Filter Design Method for High-Speed PMSMs in High-Frequency (250 Hz) Drives. Electronics, 15(12), 2568. https://doi.org/10.3390/electronics15122568
Vancouver
Zhou G, Ding Y, Du Z, Tang Y, Chen L, Yang G, et al. Sine-Wave Filter Design Method for High-Speed PMSMs in High-Frequency (250 Hz) Drives. Electronics. 2026;15(12):2568. doi:10.3390/electronics15122568
BibTeX
@article{Zhou2026,
author = {Zhou, Genmao and Ding, Yinquan and Du, Zhennan and Tang, Yiwei and Chen, Li and Yang, Guohui and Zhang, Gang},
title = {Sine-Wave Filter Design Method for High-Speed PMSMs in High-Frequency (250 Hz) Drives},
journal = {Electronics},
year = {2026},
volume = {15},
number = {12},
pages = {2568},
doi = {10.3390/electronics15122568}
}
EUVIMED