Curvature-Adaptive Smoothing for Multi-View Industrial Metrology
Electronics · 29.05.2026 · 15 (11) · 2360
DOI: 10.3390/electronics15112360 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electronics, online erschienen am 29.05.2026. Verfasst von Jae Kyung Lee und 4 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Daegu RISE Center, Ministry of Education, Daegu Metropolitan City, Republic of Korea.
Abstract (Originalsprache)
Three-dimensional point cloud data acquired in industrial environments inherently exhibit quality limitations, including measurement noise, local geometric irregularities, and surface roughness. These issues are commonly observed in both structured-light scanning and SIFT-based photogrammetric reconstruction, highlighting the necessity of post-processing in metrology applications where dimensional accuracy and geometric reliability are critical. However, conventional global-parameter smoothing methods, such as Savitzky–Golay filtering, LOWESS, and bilateral filtering, apply uniform smoothing intensity across regions with varying curvature, resulting in an inherent trade-off between noise suppression and geometry preservation. In this study, we propose a learning-independent post-processing framework that adaptively modulates smoothing strength by integrating local curvature estimation with unsupervised anomaly modeling. The proposed approach combines normal-variance-based curvature approximation with k-nearest neighbor anomaly scoring, while CAD data are employed exclusively as an external reference for evaluation. Experimental results on industrial product datasets demonstrate that, for structured-light reconstructions, the proposed method reduces average error to a level comparable to local regression-based smoothing while simultaneously achieving the highest edge-preservation index among all evaluated methods, thereby attaining an optimal operating point between noise suppression and geometric integrity. Although the suppression of extreme deviations remains limited, the geometry-preservation metrics are improved without a significant increase in average error. In contrast, SIFT+COLMAP-based reconstructions exhibit performance comparable to that of the original data, a behavior attributable to low-frequency systematic reconstruction biases rather than high-frequency sensor noise, which fall outside the corrective capacity of purely geometry-driven local smoothing.
Förderung
- Daegu RISE Center
- Ministry of Education
- Daegu Metropolitan City, Republic of Korea
- National Research Foundation of Korea
Zitieren
APA
Lee, J. K., Kwon, S. W., Park, H. G., Baek, S. K., & Kim, M. Y. (2026). Curvature-Adaptive Smoothing for Multi-View Industrial Metrology. Electronics, 15(11), 2360. https://doi.org/10.3390/electronics15112360
Vancouver
Lee JK, Kwon SW, Park HG, Baek SK, Kim MY. Curvature-Adaptive Smoothing for Multi-View Industrial Metrology. Electronics. 2026;15(11):2360. doi:10.3390/electronics15112360
BibTeX
@article{Lee2026,
author = {Lee, Jae Kyung and Kwon, Soon Woo and Park, Hae Gwang and Baek, Seung Ki and Kim, Min Young},
title = {Curvature-Adaptive Smoothing for Multi-View Industrial Metrology},
journal = {Electronics},
year = {2026},
volume = {15},
number = {11},
pages = {2360},
doi = {10.3390/electronics15112360}
}
EUVIMED