Development of an IGBT Dynamic–Static Test Platform and a Multi-Parameter Evaluation Method for Bridge-Arm Consistency in IGBT Modules
Electronics · 22.05.2026 · 15 (11) · 2237
DOI: 10.3390/electronics15112237 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electronics, online erschienen am 22.05.2026. Verfasst von Zhuoli Zhang und 4 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China.
Abstract (Originalsprache)
To address the need for dynamic and static parameter testing of IGBT modules, an integrated test platform was developed. In production-line applications, consistency differences in key parameters between the upper and lower bridge arms of manufactured modules were found to be difficult to quantify using a single metric. To overcome this limitation, a multi-parameter consistency evaluation method was proposed. Based on more than 400 sets of production-level measurements obtained from newly manufactured IGBT modules from the same batch, eight key parameters, including Eon, Eoff, dv/dt, di/dt, VCES, ICES, VGEth and IGES, were selected to construct paired samples of the upper and lower bridge arms. A dimensionless consistency index (CI) was introduced to quantify relative deviations between bridge arms, and consistency characteristics were analyzed using raw-parameter boxplots, CI boxplots, and paired scatter plots in terms of distribution, discrepancy quantification, and sample-wise pairing. The results show that different parameters exhibit different levels of distributional difference and relative deviation between the two bridge arms under identical test conditions, and that the three analyses reveal mutually consistent trends. The proposed method provides an effective basis for within-batch quality assessment, bridge-arm matching, abnormal sample identification, and production process troubleshooting.
Förderung
- National Key Research and Development Program of China
Zitieren
APA
Zhang, Z., Zheng, Y., Lu, Y., Guo, B., & Yang, C. (2026). Development of an IGBT Dynamic–Static Test Platform and a Multi-Parameter Evaluation Method for Bridge-Arm Consistency in IGBT Modules. Electronics, 15(11), 2237. https://doi.org/10.3390/electronics15112237
Vancouver
Zhang Z, Zheng Y, Lu Y, Guo B, Yang C. Development of an IGBT Dynamic–Static Test Platform and a Multi-Parameter Evaluation Method for Bridge-Arm Consistency in IGBT Modules. Electronics. 2026;15(11):2237. doi:10.3390/electronics15112237
BibTeX
@article{Zhang2026,
author = {Zhang, Zhuoli and Zheng, Yongjun and Lu, Yi and Guo, Bin and Yang, Chunsheng},
title = {Development of an IGBT Dynamic–Static Test Platform and a Multi-Parameter Evaluation Method for Bridge-Arm Consistency in IGBT Modules},
journal = {Electronics},
year = {2026},
volume = {15},
number = {11},
pages = {2237},
doi = {10.3390/electronics15112237}
}
EUVIMED