EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Targetless Multi-LiDAR Extrinsic Calibration via Structural Planar Features and Globally Consistent Pose Graph Optimization

Xuan Ren, Liang Gong, Chengliang Liu

Electronics · 15.05.2026 · 15 (10) · 2122

DOI: 10.3390/electronics15102122 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronics, online erschienen am 15.05.2026. Verfasst von Xuan Ren und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shanghai Municipal Science and Technology Commission.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accurate extrinsic calibration among multiple heterogeneous Light Detection and Ranging (LiDAR) sensors is essential for autonomous vehicle perception systems, yet remains challenging in distributed topologies where overlap exists only between adjacent sensor pairs. Existing methods often assume a central LiDAR with direct field-of-view overlap to all others and suffer from error accumulation in sequential pairwise registration. This paper presents a targetless, motionless multi-LiDAR extrinsic calibration framework that is topology-agnostic and resolves error accumulation through global optimization. The method integrates (1) Random Sample Consensus (RANSAC)-based planar patch extraction with a dual-criterion normal-guided matching strategy, (2) robust coarse alignment via TEASER++, and (3) pose graph optimization with analytically derived edge weights from Generalized Iterative Closest Point (GICP) covariance matrices. The use of structural planar primitives rather than local point descriptors overcomes density-dependent matching failures inherent to heterogeneous sensor pairs, while global pose graph optimization eliminates the cumulative error propagation of sequential pairwise approaches. Validation is performed on three distinct real-world configurations: a six-LiDAR autonomous port truck (ring topology), the four-LiDAR EDGAR research vehicle (distributed topology), and a three-LiDAR benchmark from the OpenCalib toolbox. The proposed method consistently outperforms state-of-the-art baselines, achieving 0.021 m translation Root Mean Square Error (RMSE) and 0.36° rotation RMSE on the port dataset, with full calibration completed in under 2 s on CPU—enabling rapid in-situ recalibration without requiring dedicated facilities or vehicle motion.

Förderung

  • Shanghai Municipal Science and Technology Commission

Zitieren

APA

Ren, X., Gong, L., & Liu, C. (2026). Targetless Multi-LiDAR Extrinsic Calibration via Structural Planar Features and Globally Consistent Pose Graph Optimization. Electronics, 15(10), 2122. https://doi.org/10.3390/electronics15102122

Vancouver

Ren X, Gong L, Liu C. Targetless Multi-LiDAR Extrinsic Calibration via Structural Planar Features and Globally Consistent Pose Graph Optimization. Electronics. 2026;15(10):2122. doi:10.3390/electronics15102122

BibTeX
@article{Ren2026,
  author = {Ren, Xuan and Gong, Liang and Liu, Chengliang},
  title = {Targetless Multi-LiDAR Extrinsic Calibration via Structural Planar Features and Globally Consistent Pose Graph Optimization},
  journal = {Electronics},
  year = {2026},
  volume = {15},
  number = {10},
  pages = {2122},
  doi = {10.3390/electronics15102122}
}
Kostenlos starten →