EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Joint Beamforming Design for Active Intelligent Reflecting Surface-Assisted Integrated Sensing and Communications Systems

Jihong Wang, Yingjie Zhang

Electronics · 17.04.2026 · 15 (8) · 1702

DOI: 10.3390/electronics15081702 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronics, online erschienen am 17.04.2026. Verfasst von Jihong Wang und 1 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the issues of information leakage risks faced by the base station (BS) when communicating with multiple users in an integrated sensing and communication (ISAC) system, as well as the blockage of the direct link between the BS and the target to be detected, which limits sensing functionality, this paper introduces the active intelligent reflecting surface (IRS) into the ISAC system. By creating a virtual line-of-sight (LoS) path, signal blockage is effectively mitigated, while the active IRS enhances the incident signal strength and adjusts the reflection phase shifts, thereby improving the reliability and security of communication. This paper proposes a joint optimization scheme for the active IRS-assisted ISAC system, which jointly designs the BS beamforming and the IRS reflection coefficient matrix. A non-convex optimization problem is formulated with the objective of maximizing the radar output signal-to-noise ratio (SNR) subject to communication performance constraints. To solve this problem, this paper employs an iterative algorithm based on alternating optimization (AO), fractional programming (FP), and semidefinite relaxation (SDR). Simulation results demonstrate that the proposed scheme significantly outperforms the benchmark schemes without IRS assistance and with passive IRS assistance in terms of enhancing the sensing performance of the ISAC system.

Zitieren

APA

Wang, J., & Zhang, Y. (2026). Joint Beamforming Design for Active Intelligent Reflecting Surface-Assisted Integrated Sensing and Communications Systems. Electronics, 15(8), 1702. https://doi.org/10.3390/electronics15081702

Vancouver

Wang J, Zhang Y. Joint Beamforming Design for Active Intelligent Reflecting Surface-Assisted Integrated Sensing and Communications Systems. Electronics. 2026;15(8):1702. doi:10.3390/electronics15081702

BibTeX
@article{Wang2026,
  author = {Wang, Jihong and Zhang, Yingjie},
  title = {Joint Beamforming Design for Active Intelligent Reflecting Surface-Assisted Integrated Sensing and Communications Systems},
  journal = {Electronics},
  year = {2026},
  volume = {15},
  number = {8},
  pages = {1702},
  doi = {10.3390/electronics15081702}
}
Kostenlos starten →