Bluetooth Low Energy-Based Docking Solution for Mobile Robots
Electronics · 22.01.2026 · 15 (2) · 483
DOI: 10.3390/electronics15020483 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electronics, online erschienen am 22.01.2026. Verfasst von Kyuman Lee. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education.
Abstract (Originalsprache)
Existing docking methods for mobile robots rely on a LiDAR sensor or image processing using a camera. Although both demonstrate excellent performance in terms of sensing distance and spatial resolution, they are sensitive to environmental effects, such as illumination and occlusion, and are expensive. Some environments or conditions require low-power, low-cost novel docking solutions that are less sensitive to the environment. In this study, we propose a guidance and navigation solution for a mobile robot to dock into a docking station using the values of the angle of arrival and received signal strength indicator between the mobile robot and the docking station, measured via wireless communication based on Bluetooth low energy (BLE). This proposed algorithm is a LiDAR- and camera-free docking solution. The proposed algorithm is used to run an actual mobile robot and BLE transceiver hardware, and the obtained result is significantly close to the ground truth for docking.
Förderung
- Ministry of Education
Zitieren
APA
Lee, K. (2026). Bluetooth Low Energy-Based Docking Solution for Mobile Robots. Electronics, 15(2), 483. https://doi.org/10.3390/electronics15020483
Vancouver
Lee K. Bluetooth Low Energy-Based Docking Solution for Mobile Robots. Electronics. 2026;15(2):483. doi:10.3390/electronics15020483
BibTeX
@article{Lee2026,
author = {Lee, Kyuman},
title = {Bluetooth Low Energy-Based Docking Solution for Mobile Robots},
journal = {Electronics},
year = {2026},
volume = {15},
number = {2},
pages = {483},
doi = {10.3390/electronics15020483}
}
EUVIMED