EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Signal Processing Optimization in Resource-Limited IoT for Fault Prediction in Rotating Machinery

Robertas Ūselis, Artūras Serackis, Raimondas Pomarnacki

Electronics · 17.09.2025 · 14 (18) · 3670

DOI: 10.3390/electronics14183670 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronics, online erschienen am 17.09.2025. Verfasst von Robertas Ūselis und 2 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Traditional fault detection methods, often designed for centralized or cloud-based systems, are ill-suited for the edge. The deployment of predictive maintenance solutions on ultra-low-cost embedded platforms remains a significant challenge due to strict limitations in memory, processing capacity, and energy availability. To address these challenges, vibration and motor current signals were analyzed using an ultra-low-cost RP2040 microcontroller. For fault detection, this study uses statistical time-domain features and principal component analysis (PCA), followed by classification with eXtreme Gradient Boosting (XGBoost) models distilled for resource-constrained deployment. Experimental evaluation demonstrated that vibration-based features achieved a diagnostic accuracy of 94.1%, while current-based representations obtained 95.5% accuracy when using principal components, compared to 83.2% with handcrafted statistical features. Model distillation reduced memory footprint by up to 2.5× (from 0.42 MB to 0.15 MB) without compromising diagnostic fidelity, enabling deployment within the 264 KB RAM and 2 MB Flash constraints of the RP2040 microcontroller. This study proposes a modular framework that systematically evaluates statistical features, dimensionality reduction, sensor synchronization, and model distillation, thereby identifying the most cost-efficient combination of techniques that balances diagnostic accuracy with strict memory and processing constraints. The findings establish that accurate fault detection can be realized directly on severely resource-limited hardware, thereby extending the practical applicability of condition monitoring to cost-sensitive industrial environments.

Zitieren

APA

Ūselis, R., Serackis, A., & Pomarnacki, R. (2025). Signal Processing Optimization in Resource-Limited IoT for Fault Prediction in Rotating Machinery. Electronics, 14(18), 3670. https://doi.org/10.3390/electronics14183670

Vancouver

Ūselis R, Serackis A, Pomarnacki R. Signal Processing Optimization in Resource-Limited IoT for Fault Prediction in Rotating Machinery. Electronics. 2025;14(18):3670. doi:10.3390/electronics14183670

BibTeX
@article{selis2025,
  author = {Ūselis, Robertas and Serackis, Artūras and Pomarnacki, Raimondas},
  title = {Signal Processing Optimization in Resource-Limited IoT for Fault Prediction in Rotating Machinery},
  journal = {Electronics},
  year = {2025},
  volume = {14},
  number = {18},
  pages = {3670},
  doi = {10.3390/electronics14183670}
}
Kostenlos starten →