Electromagnetic Noise and Vibration Analyses in PMSMs: Considering Stator Tooth Modulation and Magnetic Force
Electronics · 18.07.2025 · 14 (14) · 2882
DOI: 10.3390/electronics14142882 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electronics, online erschienen am 18.07.2025. Verfasst von Yeon-Su Kim und 8 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: BK21 FOUR Program funded by Chungnam National University Research, ‘New Faculty Research Support Grant’ at Changwon National University.
Abstract (Originalsprache)
This study presents an analysis of the electromagnetic noise and vibration in a surface-mounted permanent magnet synchronous machine (SPMSM), focusing on their excitation sources. To investigate this, the excitation sources were identified through an analytical approach, and their effects on electromagnetic noise and vibration were evaluated using a finite element method (FEM)-based analysis approach. Additionally, an equivalent curved-beam model based on three-dimensional shell theory was applied to determine the deflection forces on the stator yoke, accounting for the tooth-modulation effect. The stator’s natural frequencies were derived through the characteristic equation in free vibration analysis. Modal analysis was performed to validate the analytically derived natural frequencies and to investigate stator deformation under the tooth-modulation effect across various vibration modes. Furthermore, noise, vibration, and harshness (NVH) analysis via FEM reveals that major harmonic components align closely with the natural frequencies, identifying them as primary sources of elevated vibrations. A comparative study between 8-pole–9-slot and 8-pole–12-slot SPMSMs highlights the impact of force variations on the stator teeth in relation to vibration and noise characteristics, with FEM verification. The proposed method provides a valuable tool for early-stage motor design, enabling the rapid identification of resonance operating points that may induce severe vibrations. This facilitates proactive mitigation strategies to enhance motor performance and reliability.
Förderung
- BK21 FOUR Program funded by Chungnam National University Research
- ‘New Faculty Research Support Grant’ at Changwon National University
Zitieren
APA
Kim, Y., Lee, H., Yang, J., Jung, W., Choi, Y., Jang, J., Kim, Y., Shin, K., & Choi, J. (2025). Electromagnetic Noise and Vibration Analyses in PMSMs: Considering Stator Tooth Modulation and Magnetic Force. Electronics, 14(14), 2882. https://doi.org/10.3390/electronics14142882
Vancouver
Kim Y, Lee H, Yang J, Jung W, Choi Y, Jang J, et al. Electromagnetic Noise and Vibration Analyses in PMSMs: Considering Stator Tooth Modulation and Magnetic Force. Electronics. 2025;14(14):2882. doi:10.3390/electronics14142882
BibTeX
@article{Kim2025,
author = {Kim, Yeon-Su and Lee, Hoon-Ki and Yang, Jun-Won and Jung, Woo-Sung and Choi, Yeon-Tae and Jang, Jun-Ho and Kim, Yong-Joo and Shin, Kyung-Hun and Choi, Jang-Young},
title = {Electromagnetic Noise and Vibration Analyses in PMSMs: Considering Stator Tooth Modulation and Magnetic Force},
journal = {Electronics},
year = {2025},
volume = {14},
number = {14},
pages = {2882},
doi = {10.3390/electronics14142882}
}
EUVIMED