EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hybrid Radio-Frequency-Energy- and Solar-Energy-Harvesting-Integrated Circuit for Internet of Things and Low-Power Applications

Guo-Ming Sung, Shih-Hao Chen, Venkatesh Choppa, Chih-Ping Yu

Electronics · 28.05.2025 · 14 (11) · 2192

DOI: 10.3390/electronics14112192 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronics, online erschienen am 28.05.2025. Verfasst von Guo-Ming Sung und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper proposes a hybrid energy-harvesting chip that utilizes both radio-frequency (RF) energy and solar energy for low-power applications and extended service life. The key contributions include a wide input power range, a compact chip area, and a high maximum power conversion efficiency (PCE). Solar energy is a clean and readily available source. The hybrid energy harvesting system has gained popularity by combining RF and solar energy to improve overall energy availability and efficiency. The proposed chip comprises a matching network, rectifier, charge pump, DC combiner, overvoltage protection circuit, and low-dropout voltage regulator (LDO). The matching network ensures maximum power delivery from the antenna to the rectifier. The rectifier circuit utilizes a cross-coupled differential drive rectifier to convert radio frequency energy into DC voltage, incorporating boosting functionality. In addition, a solar harvester is employed to provide an additional energy source to extend service time and stabilize the output by combining it with the radio-frequency source using a DC combiner. The overvoltage protection circuit safeguards against high voltage passing from the DC combiner to the LDO. Finally, the LDO facilitates the production of a stable output voltage. The entire circuit is simulated using the Taiwan Semiconductor Manufacturing Company 0.18 µm 1P6M complementary metal–oxide–semiconductor standard process developed by the Taiwan Semiconductor Research Institute. The simulation results indicated a rectifier conversion efficiency of approximately 41.6% for the proposed radio-frequency-energy-harvesting system. It can operate with power levels ranging from −1 to 20 dBm, and the rectifier circuit’s output voltage is within the range of 1.7–1.8 V. A 0.2 W monocrystalline silicon solar panel (70 × 30 mm2) was used to generate a supplied voltage of 1 V. The overvoltage protection circuit limited the output voltage to 3.6 V. Finally, the LDO yielded a stable output voltage of 3.3 V.

Förderung

  • National Science and Technology Council

Zitieren

APA

Sung, G., Chen, S., Choppa, V., & Yu, C. (2025). Hybrid Radio-Frequency-Energy- and Solar-Energy-Harvesting-Integrated Circuit for Internet of Things and Low-Power Applications. Electronics, 14(11), 2192. https://doi.org/10.3390/electronics14112192

Vancouver

Sung G, Chen S, Choppa V, Yu C. Hybrid Radio-Frequency-Energy- and Solar-Energy-Harvesting-Integrated Circuit for Internet of Things and Low-Power Applications. Electronics. 2025;14(11):2192. doi:10.3390/electronics14112192

BibTeX
@article{Sung2025,
  author = {Sung, Guo-Ming and Chen, Shih-Hao and Choppa, Venkatesh and Yu, Chih-Ping},
  title = {Hybrid Radio-Frequency-Energy- and Solar-Energy-Harvesting-Integrated Circuit for Internet of Things and Low-Power Applications},
  journal = {Electronics},
  year = {2025},
  volume = {14},
  number = {11},
  pages = {2192},
  doi = {10.3390/electronics14112192}
}
Kostenlos starten →