EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A 75 kW Medium-Frequency Transformer Design Based in Inductive Power Transfer (IPT) for Medium-Voltage Solid-State Transformer Applications

Juan Blanco-Ortiz, Eduardo García-Martínez, Ignacio González-Prieto, Mario J. Duran

Electronics · 07.03.2025 · 14 (6) · 1059

DOI: 10.3390/electronics14061059 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronics, online erschienen am 07.03.2025. Verfasst von Juan Blanco-Ortiz und 3 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union’s Horizon Europe project, SSTAR.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solid-State Transformers (SSTs) enable significant improvements in size and functionality compared to conventional power transformers. However, one of the key challenges in Solid-State Transformer design is achieving reliable insulation between the high-voltage and low-voltage sections. This proposal presents the design and optimization of a high-insulation Medium-Frequency Transformer (MFT) for 66 kV grids operating at 50 kHz and delivering up to 75 kW for SST applications using Inductive Power Transfer (IPT) technology. A fixed 50 mm gap between the primary and secondary windings is filled with dielectric oil to enhance insulation. The proposed IPT system employs a double-D coil design developed through iterative 2D and 3D finite element method simulations to optimize the magnetic circuit, thereby significantly reducing stray flux and losses. Notably, the double-D configuration reduces enclosure losses from 269.6 W, observed in a rectangular coil design, to 4.38 W, resulting in an overall system loss reduction of 42.4% while maintaining the electrical parameters required for zero-voltage switching operation. These advancements address the critical limitations in conventional Medium-Frequency Transformers by providing enhanced insulation and improved thermal management. The proposed IPT-based design offers a low-loss solution with easy thermal management for solid-state transformer applications in high-voltage grids.

Förderung

  • European Union’s Horizon Europe project, SSTAR

Zitieren

APA

Blanco-Ortiz, J., García-Martínez, E., González-Prieto, I., & Duran, M. J. (2025). A 75 kW Medium-Frequency Transformer Design Based in Inductive Power Transfer (IPT) for Medium-Voltage Solid-State Transformer Applications. Electronics, 14(6), 1059. https://doi.org/10.3390/electronics14061059

Vancouver

Blanco-Ortiz J, García-Martínez E, González-Prieto I, Duran MJ. A 75 kW Medium-Frequency Transformer Design Based in Inductive Power Transfer (IPT) for Medium-Voltage Solid-State Transformer Applications. Electronics. 2025;14(6):1059. doi:10.3390/electronics14061059

BibTeX
@article{BlancoOrtiz2025,
  author = {Blanco-Ortiz, Juan and García-Martínez, Eduardo and González-Prieto, Ignacio and Duran, Mario J.},
  title = {A 75 kW Medium-Frequency Transformer Design Based in Inductive Power Transfer (IPT) for Medium-Voltage Solid-State Transformer Applications},
  journal = {Electronics},
  year = {2025},
  volume = {14},
  number = {6},
  pages = {1059},
  doi = {10.3390/electronics14061059}
}
Kostenlos starten →