EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Multi-Mode Pressure Stabilization Control Method for Pump–Valve Cooperation in Liquid Supply System

Peng Xu, Ziming Kou

Electronics · 17.11.2024 · 13 (22) · 4512

DOI: 10.3390/electronics13224512 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronics, online erschienen am 17.11.2024. Verfasst von Peng Xu und 1 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to solve the problems of frequent pressure fluctuations caused by frequent action of the unloading valve of the pump station and serious hydraulic shock due to the variable amount of fluid used in the hydraulic support system of the coal mining face and the irregularity of the load suffered by the system, a pump–valve cooperative multi-mode stabilizing control method based on a digital unloading valve was proposed. Firstly, a prototype of a digital unloading valve under high-pressure and high water-based conditions was developed, and a digital control scheme was proposed to control the pilot valve by a servo motor to adjust the system pressure in real time. Then, an experimental platform for simulating the hydraulic bracket and a co-simulation model was constructed, and the validity of the co-simulation model was verified through experiments. Secondly, a collaborative multi-mode pressure stabilization control method for the pump valve based on a GRNN (General Regression Neural Network) was established to control the flow and pressure output of the emulsion pumping station according to the actual working conditions. Finally, numerical research and experimental verification were carried out for different working conditions to prove the effectiveness of this method. The results showed that the proposed pressure stabilization control method could adaptively adjust the working state of the digital unloading valve and the liquid supply flow of the emulsion pump station according to the working condition of the hydraulic support, effectively reducing the frequency and amplitude of the system pressure fluctuations and making the system pressure more stable.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Xu, P., & Kou, Z. (2024). A Multi-Mode Pressure Stabilization Control Method for Pump–Valve Cooperation in Liquid Supply System. Electronics, 13(22), 4512. https://doi.org/10.3390/electronics13224512

Vancouver

Xu P, Kou Z. A Multi-Mode Pressure Stabilization Control Method for Pump–Valve Cooperation in Liquid Supply System. Electronics. 2024;13(22):4512. doi:10.3390/electronics13224512

BibTeX
@article{Xu2024,
  author = {Xu, Peng and Kou, Ziming},
  title = {A Multi-Mode Pressure Stabilization Control Method for Pump–Valve Cooperation in Liquid Supply System},
  journal = {Electronics},
  year = {2024},
  volume = {13},
  number = {22},
  pages = {4512},
  doi = {10.3390/electronics13224512}
}
Kostenlos starten →